Menü Schließen
Excalibur Stick Electrode

Durchmesser / Lieferform

Durchmesser

Fleetweld® 5P®

E-Hand (SMAW)

KLASSIFIZIERUNGEN::
E6010

Mild Steel, Cellulosic • AWS E6010

Dieses Produkt wurde eingestellt oder steht nicht mehr zum Verkauf.

DETAILS

Eigenschaften

  • Deep arc penetration
  • Light slag with minimal arc interference
  • Excellent vertical and overhead capability

Typische Anwendungen

  • Cross country and in-plant pipe welding
  • Steel with moderate surface contaminants
  • Square edge butt welds
  • Welding on galvanized and specially coated steels

Schweißpositionen

  • All

Schutzgas

  • Not Applicable

Service Informationen

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS-Suchseite

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.1 E6010
ABS AWS A5.1 E6010
CWB CSA W48 E4310
LR LR - Chapter 11 3M

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F)
E6010 Requirement 330 (48) min. 410 (60) min. 22 min. 27 (20) min.
Typical Result, As-welded 380-470 (56-68) 460-560 (67-82) 22-32 32-118 (23-87)

DEPOSIT COMPOSITION

Classification %C %Cr %Mn %Mo %Ni %P %S %Si %V
E6010 Requirement 0.20 max. 0.20 max. 1.20 max. 0.30 max. 0.30 max. 1.00 max. 0.08 max.
Typical Result 0.10-0.13 0.05 max. 0.35-0.60 0.01 max. 0.03 max. 0.004-0.012 0.004-0.012 0.14-0.39 0.01 max.

TYPICAL OPERATING PROCEDURES

Diameter Polarity⁽¹⁾ Current
Amps
3/32 in (2.4 mm) DC+ 40-80
3/32 in (2.4 mm) DC- 50-85
1/8 in (3.2 mm) DC+ 70-130
1/8 in (3.2 mm) DC- 75-135
5/32 in (4.0 mm) DC+ 90-165
5/32 in (4.0 mm) DC- 100-175
3/16 in (4.8 mm) DC+ 140-225
3/16 in (4.8 mm) DC- –
7/32 in (5.6 mm) DC+ 200-275
7/32 in (5.6 mm) DC- –
1/4 in (6.4 mm) DC+ 220-325
1/4 in (6.4 mm) DC- –

NOTES

Note
⁽¹⁾ Preferred polarity is listed first.