Menü Schließen
Excalibur Stick Electrode

Durchmesser / Lieferform

Durchmesser
 (3) 10 lb Easy Open Can
 22.7 KG CAN
 Can 22,7 kg
2,4 x 300 mm (3/32 x 12 in) ED032564
2.4x300 mm ED010283
3,2 x 350 mm (1/8 x 14 in) ED032565
3.2x350 mm ED010278
4.0 x 350 mm ED010285

Fleetweld® 5P+®

E-Hand-Schweißen (SMAW/MMA)

KLASSIFIZIERUNGEN::
AWS : E6010
ABS : E6010

Mild Steel, Cellulosic • AWS E6010

Durchmesser

Durchmesser wählen

  • 2,4 x 300 mm (3/32 x 12 in)
  • 2.4x300 mm
  • 3,2 x 350 mm (1/8 x 14 in)
  • 3.2x350 mm
  • 4.0 x 350 mm

Lieferform

Lieferform auswählen

  • (3) 10 lb Easy Open Can
  • 22.7 KG CAN
  • Can 22,7 kg

DETAILS

Eigenschaften

  • Deep arc penetration
  • Light slag with minimal arc interference
  • Excellent vertical and overhead capability

Typische Anwendungen

  • Cross country and in-plant pipe welding
  • Steel with moderate surface contaminants
  • Square edge butt welds
  • Welding on galvanized and specially coated steels

Schweißpositionen

  • Alle

Schutzgas

  • Not Applicable

Service Informationen

Dokumentation

Ergänzende Produkte

50 lb Can of Lincoln Electric Stick Electrodes

Fleetweld® 5P+

ED010283
50 lb Can of Lincoln Electric Stick Electrodes

Fleetweld® 5P+

ED010285
Fleetweld 5P+ 14 Stick Electrode in 10 lb can"

Fleetweld® 5P+

ED032564
Fleetweld 5P+ 14 Stick Electrode in 10 lb can"

Fleetweld® 5P+

ED032565
Alle anzeigen

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS-Suchseite

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.1 E6010
ISO ISO 2560-A E 42 3 C 2 5
ABS AWS A5.1 E6010
CWB CSA W48 E4310
DNV-GL DNV - 2.9 3

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) 		Hardness Rockwell B
E6010 Requirement 330 (48) min. 410 (60) min. 22 min. 27 (20) min.
Typical Result, As-welded 430-480 (62-69) 530-580 (76-85) 23-31 51-122 (38-90) 82-91

DEPOSIT COMPOSITION

Classification %C %Cr %Mn %Mo %Ni %P %S %Si %V
E6010 Requirement 0.20 max. 0.20 max. 1.20 max. 0.30 max. 0.30 max. 1.00 max. 0.08 max.
Typical Result 0.12-0.16 0.06 max. 0.50-0.67 0.02 0.07 max. 0.007-0.012 0.004-0.011 0.14-0.25 0.01

TYPICAL OPERATING PROCEDURES

Diameter Polarity⁽¹⁾ Current
Amps
3/32 in (2.4 mm) DC+ 50-85
3/32 in (2.4 mm) DC- 50-85
1/8 in (3.2 mm) DC+ 75-135
1/8 in (3.2 mm) DC- 75-135
5/32 in (4.0 mm) DC+ 100-175
5/32 in (4.0 mm) DC- 100-175
3/16 in (4.8 mm) DC+ 140-225
3/16 in (4.8 mm) DC- –

NOTES

Note
⁽¹⁾ Preferred polarity is listed first.