Menü Schließen
10 Pound Cans of Stick Electrode

Durchmesser / Lieferform

Durchmesser
 Can 4,5 kg
 Can 22,7 kg
2,5 x 350 mm (3/32 x 14 in) ED033835 ED030916
3,2 x 350 mm (1/8 x 14 in) ED033836

Pipeliner® 16P

E-Hand-Schweißen (SMAW/MMA)

KLASSIFIZIERUNGEN::
E7016-H4
E7016-1 H4

Mild Steel, Low Hydrogen • AWS E7016-1 H4

Durchmesser

Durchmesser wählen

  • 2,5 x 350 mm (3/32 x 14 in)
  • 3,2 x 350 mm (1/8 x 14 in)

Lieferform

Lieferform auswählen

  • Can 4,5 kg
  • Can 22,7 kg

DETAILS

Designed for root pass welding of up to X100 grade pipe

Eigenschaften

  • DC- (DCEN) is the recommended polarity for root pass welding on pipe

Typische Anwendungen

  • Root pass welding
  • Hot, fill and cap pass welding up to X60
  • Low hydrogen, vertical up capability on X60 grade pipe

Schweißpositionen

  • Alle, ausgenommen Fallnaht

Schutzgas

  • Not Applicable

Besondere Eigenschaften

  • Q2 Lot® - Lot Controlled Chemistry and Mechanical Properties

Service Informationen

Dokumentation

Ergänzende Produkte

50 lb Can of Lincoln Electric Stick Electrodes

Excalibur® 7018 MR® Stick (SMAW) Electrode

ED028283
50 lb Can of Lincoln Electric Stick Electrodes

PIPELINER® 16P

ED030916

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS-Suchseite

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.1 E7016-1 H4, E7016-H4
ABS AWS A5.1 E7016-H4
CWB AWS A5.1M E4916-H4

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -40°C (-40°F) 		Charpy V-Notch
J (ft-lbs) @ -45°C (-50°F)
E7016-1 H4 Requirement 400 (58) min. 480 (70) min. 22 min. 27 (20) min.
Typical Result, As-welded 420-550 (61-79) 510-640 (74-93) 25-41 27-186 (20-137) 29-168 (22-124)

DEPOSIT COMPOSITION

Classification %C %Cr %Mn %Mo %Ni %P %S %Si %V %Mn+Ni+Cr+Mo+V Diffusible Hydrogen
mL/100g Weld Metal 		1800F H2O - As received
E7016-1 H4 Requirement 0.15 max. 0.20 max. 1.60 max. 0.30 max. 0.30 max. 0.035 max. 0.035 max. 0.75 max. 0.08 max. 1.75 max. 4 max. 0.6 max.
Typical Result 0.04-0.08 0.02-0.05 1.03-1.47 0.02 max. 0.01-0.04 0.008-0.014 0.003-0.012 0.32-0.57 0.02 max. 1.09-1.48 1-4 0.3 max.

TYPICAL OPERATING PROCEDURES

Diameter Polarity⁽¹⁾ Current
Amps
2.5 mm (3/32 in) DC± 55-105
2.5 mm (3/32 in) AC 60-115
3.2 mm (1/8 in) DC± 75-135
3.2 mm (1/8 in) AC 80-150
4.0 mm (5/32 in) DC± 120-170
4.0 mm (5/32 in) AC 120-185

NOTES

Note
⁽¹⁾ Preferred polarity is listed first.
DC- for root pass on pipe; DC± for general welding