DETAILS
LINCORE® 35-S ideal for tractor rollers, idlers, trunnions, crane wheels, mine car wheels, track rails, shafts and bearing journals for moderate impact and abrasion applications during automatic and semiautomatic operations.
Features
- Intended for rolling and sliding metal-to-metal wear with moderate impact and abrasion
- For automatic and semiautomatic operation on mild and low alloy steels
- Recommended as final overlay where medium hardness and good machinability are required
- Unlimited deposit thickness with proper preheat and interpass temperatures and procedures
- Weld with Lincore® 801 or Lincore® 802
Typical Applications
- For Build-Up: Tractor rollers, Idlers, Trunnions, Crane wheels and Caster rolls
- For Hardfacing: Mine car wheels, track rails, Shafts and Bearing journals
Welding Positions
- Flat/Horizontal
Service Information
Documentation
You May Also Need
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
MECHANICAL PROPERTIES
| Flux | Classification | Hardness Rockwell C |
|---|---|---|
| Lincolnweld® 801® | Typical Result | 39 |
DEPOSIT COMPOSITION
| Flux | Classification | %C | %Cr | %Mn | %Mo | %Si |
|---|---|---|---|---|---|---|
| Lincolnweld® 801® | Typical Result | 0.19 | 2.3 | 1.7 | 0.5 | 0.6 |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity |
Wire Feed Speed
m/min (in/min) |
Voltage
volts |
Approx. Current
amps |
|---|---|---|---|---|
| 1/8 in (3.2 mm) | DC+ | 1.3 (50) | 28 | 340 |
| 1/8 in (3.2 mm) | DC+ | 2.5 (100) | 28 | 500 |
| 1/8 in (3.2 mm) | DC+ | 3.8 (150) | 28 | 660 |