Menu Close
SuperArc MIG wire, 33 lb. Plastic spool

Diameters / Packaging

Diameters

Pipeliner® 70S-G

MIG (GMAW)

CLASSIFICATIONS:
ER70S-G

Pipeliner® 70S-G from Lincoln Electric has a low silicon level for unblemished welds with less clean up required.

DETAILS

Has a low silicon level for unblemished welds with less clean up required. Provides good back bead shape when using the STT® process on root passes. Recommended for root pass welding of up to X100 grade pipe as well as hot, fill and cap pass welding of up to X70 grade pipe.

Features

  • Root pass capability up to X100 and hot, fill and cap pass up to X70 grade pipe
  • Low silicon level for minimal clean-up
  • Good back bead shape on STT® root passes
  • Q2 Lot® - Certificate showing actual deposit chemistry available online
  • ProTech® packaging system

Typical Applications

  • Root pass welding of up to X100 grade pipe
  • Hot, fill and cap pass welding of up to X70 grade pipe

Welding Positions

  • All

Shielding Gas

  • Mixed Shielding Gas|100% CO2

Service Information

You May Also Need

14lb Coil Innershield NR-207 Hermetically Sealed Pail

Innershield® NR®-208-H Flux-Cored (FCAW-S) Wire

ED023366
50 lb Can of Lincoln Electric Stick Electrodes

Pipeliner® 8P+

ED030826
Generic 8lb can

Excalibur® 11018M MR® Stick (SMAW) Electrode

ED032607
Fleetweld 5P 14 Stick Electrode in 10 lb cans"

Pipeliner® 19P Stick (SMAW) Electrode

ED032622
10 lb cans of Pipeliner LH-D stick electrode

Pipeliner® LH-D90 Stick Electrode (SMAW)

ED032629
10 lb plastic spool Pipeliner 70S-G MIG wire

Pipeliner® 80Ni1 MIG (GMAW) Wire

ED033122
Magnum Pro 250L Gun

Magnum® PRO Nozzle - 350A, Thread-on, Recess, 5/8 in (15.9 mm) ID

KP2742-1-62R
Magnum Pro Tapered Contact tip

Copper Plus® Contact Tip - 350A, Standard, .045 in (1.2 mm) - 10/pack

KP2744-045

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.18 ER70S-G

MECHANICAL PROPERTIES

Classification Shielding Gas Polarity Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
%
ER70S-G Requirement Not Specified Info. Only 400 (58) min. 480 (70) min. 22 min.
Typical Result, As-welded 100% CO2 DC+ 400-450 (58-65) 500-550 (73-79) 23-29

WIRE COMPOSITION

Classification %Al %C %Cr %Mn %Mo %Ni %P %S %Si %Ti %V %Zr %Total Cu
Typical Result <0.00 0.08-0.09 0.02-0.04 1.16-1.25 0.01 0.03 0.004-0.010 0.020-0.025 0.51-0.60 <0.00 <0.005 <0.001 0.15-0.23

TYPICAL OPERATING PROCEDURES

Diameter Polarity CTWD
mm (in.)⁽¹⁾ 		Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps 		Melt-off Rate
kg/hr (lb/hr)
1.1 mm (0.045 in) DC+ 12-19 (1/2-3/4) 3.2-12.7 (125-500) 19-30 145-340 1.5-6.0 (3.4-13.2)

NOTES

Note
⁽¹⁾ CTWD (Contact Tip to Work Distance). Subtract 1/4 in. (6.4 mm) to calculate Electrical Stickout.