Diameters / Packaging
|
Diameters |
(3) 10 lb Easy Open Can |
8 lb (3.6 kg) Easy Open Can |
10 lb (4.5 kg) Easy Open Can |
|---|---|---|---|
| 1/8 x 14 in (3.2 x 355 mm) | EL99125634 | ||
| 3/16 x 14 in (4.8 x 350 mm) | EL99161634 | ||
| 3/32 x 12 in (2.4 x 305 mm) | EL99093632 | ||
| 5/32 x 14 in (4.0 x 355 mm) | EL99156634 |
DETAILS
TECH-ROD® 99 provides more machinable weld deposit than Tech-Rod® 55, and is typically used for welding of cast irons to other cast irons as well as for joining cast irons to mild and stainless steels.
Features
- Used for welding of cast irons to other cast irons as well as for joining cast irons to mild steels and stainless steels
- A preheat and inter-pass temperature of not less than 350°F (177°C) is required during welding to prevent cracking
- Q2 Lot® - certificates showing actual deposit composition available online
Typical Applications
- Generally more machinable than a Tech-Rod® 55 deposit
- Intended to join and repair pliable cast iron
Welding Positions
- Polarity DC+
Shielding Gas
- N/A
Disclaimers
Service Information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.15 | ENi-CI |
DEPOSIT COMPOSITION
| Classification | %Al | %C | %Cu | %Fe | %Mn | %S | %Si | %Ni+Co |
|---|---|---|---|---|---|---|---|---|
| ENi-CI Requirement | 1.0 max. | 2.0 max. | 2.5 max. | 8.0 max. | 2.5 max. | 0.03 max. | 4.0 max. | 85 min. |
| Typical Result | 0.1 | 0.9 | 0.0 | 3.4 | 0.8 | 0.00 | 0.2 | 94 |
TYPICAL OPERATING PROCEDURES
| Diameter |
Current
Amps |
|---|---|
| 3/32" (2.4 mm) | 65-85 |
| 1/8" (3.2 mm) | 80-110 |
| 5/32" (4.0 mm) | 110-140 |