UltraCore, 50 lb Fiber Spool

Diameters / Packaging

Diameters
(4) 15 lb Plastic Spool
33 lb Spool
33 lb Spool Buy America
50 lb Spool
500 lb Accu-Trak® Drum
0.045 in (1.1 mm) ED033986 ED033989 ED033992
0.052 in (1.3 mm) ED033990 ED033993 ED036442
1/16 in (1.6 mm) ED033988 ED033991 ED036619 ED033994

UltraCore® HD-M Flux-cored (FCAW-G) Wire

Flux-Cored Gas-Shielded (FCAW-G) | ED033989

AWS:
E71T-9M-H8
E71T1-M21A2-CS1-H8

UltraCore® HD-M from Lincoln Electric is a mild steel, gas-shielded flux-cored wire designed to provide high deposition rates and flat bead appearance.

DETAILS

UltraCore® HD-M is a mild steel, gas-shielded flux-cored wire designed to provide high deposition rates and flat bead appearance required in many out-of-position applications.

Features

  • Increase weld deposition to more than 10 lbs./hr. out-of-position
  • Fast freezing slag for a flat bead shape and increased productivity in all positions, including vertical up
  • Operators can set the machine on a single setting and weld in all positions

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.20 E71T-1M-H8, E71T-9M-H8
AWS AWS A5.36 E71T1-M21A2-CS1-H8
ABS ABS - Part 2 3YSA H10
CWB CSA W48 E491T1-M21A3-CS1-H8 (E491T-9M-H8)
DNV-GL DNV - 2.9 III YMS H10
LR LR - Chapter 11 3YS H10

MECHANICAL PROPERTIES

Classification Shielding Gas Polarity Yield Strength @ 0.2% Offset
MPa (ksi)
Tensile Strength
MPa (ksi)
Elongation
%
Charpy V-Notch
J (ft-lbs) @ -20°C (0°F)
Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F)
E71T-1M-H8 Requirement 75-80% Ar, balance CO2 DC+ 400 (58) min. 480-660 (70-95) 22 min. 27 (20) min.
E71T-9M-H8 Requirement 75-80% Ar, balance CO2 DC+ 400 (58) min. 480-660 (70-95) 22 min. 27 (20) min.
E71T1-M21A2-CS1-H8 Requirement M21-ArC DC+ 400 (58) min. 480-660 (70-95) 22 min. 27 (20) min.
Typical Result, As-welded 75% Ar, 25% CO2 DC+ 540 (78) 600-650 (87-95) 22 34-39 (25-29) 29-128 (21-94)

DEPOSIT COMPOSITION

Classification Shielding Gas Polarity %B %C %Mn %P %S %Si Diffusible Hydrogen
mL/100g Weld Metal
E71T-1M-H8 Requirement 75-80% Ar, balance CO2 DC+ 0.12 max. 1.75 max. 0.03 max. 0.03 max. 0.90 max. 8.0 max.
E71T-9M-H8 Requirement 75-80% Ar, balance CO2 DC+ 0.12 max. 1.75 max. 0.03 max. 0.03 max. 0.90 max. 8.0 max.
E71T1-M21A2-CS1-H8 Requirement M21-ArC DC+ 0.12 max. 1.75 max. 0.030 max. 0.030 max. 0.90 max. 8 max.
Typical Result 75% Ar, 25% CO2 DC+ 0.003-0.0068 0.04-0.06 1.35-1.58 0.01-0.015 0.01 max. 0.45-0.58 3.3-8

TYPICAL OPERATING PROCEDURES

Diameter Shielding Gas Polarity CTWD
mm (in.)⁽¹⁾
Wire Feed Speed
m/min (in/min)
Voltage
volts
Approx. Current
amps
Melt-off Rate
kg/hr (lb/hr)
Deposition Rate
kg/hr (lb/hr)
Efficiency
%
0.045 in (1.1 mm) 75% Ar / 25% CO2 DC+ 25 (1) 4.4 (175) 21-26 130 1.8 (4.0) 1.6 (3.5) 87 - 88
0.045 in (1.1 mm) 75% Ar / 25% CO2 DC+ 25 (1) 6.4 (250) 22-27 155 2.6 (5.7) 2.3 (5.0) 87 - 88
0.045 in (1.1 mm) 75% Ar / 25% CO2 DC+ 25 (1) 7.6 (300) 23-28 170 3.1 (6.9) 2.7 (6.0) 87 - 88
0.045 in (1.1 mm) 75% Ar / 25% CO2 DC+ 25 (1) 8.9 (350) 23-29 190 3.6 (8.0) 3.2 (7.0) 87 - 88
0.045 in (1.1 mm) 75% Ar / 25% CO2 DC+ 25 (1) 10.2 (400) 25-30 205 4.1 (9.1) 3.6 (8.0) 87 - 88
0.045 in (1.1 mm) 75% Ar / 25% CO2 DC+ 25 (1) 11.4 (450) 26-31 225 4.7 (10.3) 4.1 (9.0) 87 - 88
0.045 in (1.1 mm) 75% Ar / 25% CO2 DC+ 25 (1) 12.7 (500) 27-33 230 5.2 (11.4) 4.5 (9.9) 87 - 88
0.045 in (1.1 mm) 75% Ar / 25% CO2 DC+ 25 (1) 14.0 (550) 28-33 245 5.7 (12.6) 4.9 (10.9) 87 - 88
0.045 in (1.1 mm) 75% Ar / 25% CO2 DC+ 25 (1) 15.2 (600) 28-34 265 6.2 (13.7) 5.4 (11.9) 87 - 88
.052" (1.3 mm) 75% Ar / 25% CO2 DC+ 25 (1) 3.8 (150) 22-26 145 2.0 (4.5) 1.8 (3.9) 87 - 88
.052" (1.3 mm) 75% Ar / 25% CO2 DC+ 25 (1) 5.1 (200) 23-27 170 2.7 (6.0) 2.4 (5.2) 87 - 88
.052" (1.3 mm) 75% Ar / 25% CO2 DC+ 25 (1) 6.4 (250) 23-28 190 3.4 (7.5) 2.9 (6.5) 87 - 88
.052" (1.3 mm) 75% Ar / 25% CO2 DC+ 25 (1) 7.6 (300) 24-29 215 4.1 (9.0) 3.5 (7.8) 87 - 88
.052" (1.3 mm) 75% Ar / 25% CO2 DC+ 25 (1) 8.9 (350) 24-30 235 4.8 (10.5) 4.1 (9.1) 87 - 88
.052" (1.3 mm) 75% Ar / 25% CO2 DC+ 25 (1) 9.5 (375) 25-30 250 5.1 (11.2) 4.4 (9.8) 87 - 88
.052" (1.3 mm) 75% Ar / 25% CO2 DC+ 25 (1) 10.8 (425) 26-31 270 5.8 (12.7) 5.0 (11.1) 87 - 88
.052" (1.3 mm) 75% Ar / 25% CO2 DC+ 25 (1) 12.1 (475) 26-32 295 6.4 (14.2) 5.6 (12.4) 87 - 88
.052" (1.3 mm) 75% Ar / 25% CO2 DC+ 25 (1) 12.7 (500) 27-33 305 6.8 (15.0) 5.9 (13.0) 87 - 88
1/16 in (1.6 mm) 75% Ar / 25% CO2 DC+ 25 (1) 3.8 (150) 22 - 26 195 2.9 (6.3) 2.5 (5.5) 86 -87
1/16 in (1.6 mm) 75% Ar / 25% CO2 DC+ 25 (1) 4.4 (175) 23 - 26 215 3.4 (7.4) 2.9 (6.4) 86 -87
1/16 in (1.6 mm) 75% Ar / 25% CO2 DC+ 25 (1) 5.1 (200) 23 - 27 235 3.8 (8.4) 3.3 (7.3) 86 -87
1/16 in (1.6 mm) 75% Ar / 25% CO2 DC+ 25 (1) 5.7 (225) 24 - 28 255 4.3 (9.5) 3.7 (8.2) 86 -87
1/16 in (1.6 mm) 75% Ar / 25% CO2 DC+ 25 (1) 6.4 (250) 25 - 29 270 4.8 (10.5) 4.1 (9.1) 86 -87
1/16 in (1.6 mm) 75% Ar / 25% CO2 DC+ 25 (1) 7.6 (300) 25 - 30 310 5.7 (12.6) 5.0 (11.0) 86 -87
1/16 in (1.6 mm) 75% Ar / 25% CO2 DC+ 25 (1) 8.3 (325) 26 - 31 330 6.2 (13.7) 5.4 (11.9) 86 -87
1/16 in (1.6 mm) 75% Ar / 25% CO2 DC+ 25 (1) 8.9 (350) 28 - 32 350 6.7 (14.7) 5.8 (12.8) 86 -87
1/16 in (1.6 mm) 75% Ar / 25% CO2 DC+ 25 (1) 10.2 (400) 28 - 33 390 7.6 (16.8) 6.6 (14.6) 86 -87

NOTES

Note
⁽¹⁾ To estimate ESO, subtract 1/4 in. (6.0 mm) from CTWD.