DETAILS
This non destructive technique allows the detection of cracksopening on the surface of the plate helping a visual control, due to the cracks becoming visible (30 to 50 μm). + Product: Thin and uniform fi lm and transparent film. After drying, the white surface appears. Very good surface coverage due to the thin granulometry. Quick drying of the solvent included in the developer. Spray: works in all position. Very good identifi cation of the cracks under white light. Butane/propane spraying. Inspection of the defects: Cracks are visible at the surface of the plates, thanks to clear vivid red indications easily seen by the naked eye (no UV light required). Powerful penetration. Due to its viscosity. Spray: works in all positions. Very good identifi cation of cracks under white light. Easy to remove with water. No “ground” noise. Butane/propane spraying (extremely fl ammable).
Features
- Detection of cracks and surface faults. Defects highlight by coloration of the penetrant. Daylight review. Thin and uniform film and transparent film.
- After drying, the white surface appears.
- Very good surface coverage due to the thin granulometry.
- Quick drying of the solvent
- Spraying in all positions.
- Very good identification of the cracks under white light
- Instructions: Be sure that the area is clean and without penetrant last trace. Shake the can until hearing clearly the ball bearing. Spray at 20 cm for an uniform layer without super thickness. Wait a few minutes until obtaining a dry powdery fi lm before examining the surface. Propellant: Butane / Propane. Volume : 500 ml (net) - 650 ml (nominal)
- CAUTION: before use, carefully read and understand the safety datasheet available on our websites