Menu Close
UltraCore, 50 LB coil

Diameters / Packaging

Diameters
 50 lb Coil
3/32 in (2.4 mm) ED035767
5/64 in (2.0 mm) ED035766

UltraCore® 80Ni1C Flux-cored (FCAW-G) Wire

Flux-Cored Gas-Shielded (FCAW-G) | ED035767

CLASSIFICATIONS:
E80T1-Ni1C-JH8
E80T1-C1A4-Ni1-H8

UltraCore® 80Ni1C from Lincoln Electric has excellent operator appeal and slag detachability.

Diameter

Select Diameter

  • 3/32 in (2.4 mm)
  • 5/64 in (2.0 mm)

Package

Select Package

  • 50 lb Coil

DETAILS

Excellent operator appeal and slag detachability.

Features

  • High deposition in the flat and horizontal positions
  • Excellent operator appeal and slag detachability
  • Designed for welding with 100% CO2 shielding gas
  • ProTech® foil bag packaging

Service Information

Documentation

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

MECHANICAL PROPERTIES

Classification Shielding Gas Polarity Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -40°C (-40°F)
E80T1-Ni1C-JH8 Requirement 100% CO2 DC+ 470 (68) min. 550-690 (80-100) 19 min. 27 (20) min.
E80T1-C1A4-Ni1-H8 Requirement 100% CO2 DC+ 470 (68) min. 550-690 (80-100) 19 min. 27 (20) min.
Typical Result, As-welded 100% CO2 DC+ 540-600 (78-87) 610-670 (88-96) 24-28 28-84 (21-62)

DEPOSIT COMPOSITION

Classification Shielding Gas Polarity %B %C %Cr %Mn %Mo %Ni %P %S %Si %V Diffusible Hydrogen
mL/100g Weld Metal
E80T1-Ni1C-JH8 Requirement 100% CO2 DC+ 0.12 max. 0.15 max. 1.50 max. 0.35 max. 0.80 - 1.10 0.030 max. 0.030 max. 0.80 max. 0.05 max. 8.0 max.
E80T1-C1A4-Ni1-H8 Requirement 100% CO2 DC+ 0.12 max. 0.15 max. 1.75 max. 0.35 max. 0.80 - 1.10 0.030 max. 0.030 max. 0.80 max. 0.05 max. 8 max.
Typical Result 100% CO2 DC+ 0.002-0.004 0.04-0.08 0.09 max. 1.29-1.45 0.01 max. 0.80-1.03 0.016 max. 0.010 max. 0.52-0.58 0.03 max. 1-8

TYPICAL OPERATING PROCEDURES

Diameter Shielding Gas Polarity CTWD
mm (in.)⁽¹⁾ 		Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps 		Melt-off Rate
kg/hr (lb/hr) 		Deposition Rate
kg/hr (lb/hr) 		Efficiency
%
1/16 in (1.6 mm) 100% CO2 DC+ 25 (1) 3.2 (125) 23-27 155 2.2 (4.8) 2.0 (4.4) 84 - 89
1/16 in (1.6 mm) 100% CO2 DC+ 25 (1) 6.4 (250) 25-29 250 4.5 (9.9) 4.0 (8.8) 84 - 89
1/16 in (1.6 mm) 100% CO2 DC+ 25 (1) 9.5 (375) 28-32 325 6.8 (14.9) 6.0 (13.2) 84 - 89
5/64 in (2.0 mm) 100% CO2 DC+ 25 (1) 3.2 (125) 23-27 240 3.5 (7.8) 3.1 (6.8) 84 - 88
5/64 in (2.0 mm) 100% CO2 DC+ 25 (1) 5.7 (225) 25-29 350 6.4 (14.0) 5.5 (12.2) 84 - 88
5/64 in (2.0 mm) 100% CO2 DC+ 31 (1 1/4) 8.3 (325) 27-32 395 8.5 (18.6) 7.5 (16.4) 84 - 88
3/32 in (2.4 mm) 100% CO2 DC+ 25 (1) 3.2 (125) 27-32 320 5.4 (11.9) 4.7 (10.3) 87 - 89
3/32 in (2.4 mm) 100% CO2 DC+ 31 (1 1/4) 5.1 (200) 28-33 450 8.6 (19.0) 7.6 (16.7) 87 - 89
3/32 in (2.4 mm) 100% CO2 DC+ 31 (1 1/4) 6.4 (250) 31-37 580 13.1 (28.8) 11.4 (25.1) 87 - 89

NOTES

Note
⁽¹⁾ To estimate ESO, subtract 1/4 in. (6.0 mm) from CTWD.