DETAILS
BLUE MAX® MIG 310 ideal for use of welding stainless steels of similar composition in cast and wrought forms. Typically used for welding 310 stainless and similar high heat base metal applications
Features
- Q2 Lot® - Certified Material Test Report showing actual wire composition and Country of Origin of each lot is available online in the Certificate Center
- Proprietary surface lubricant for steady feeding and arc stability leading to exceptional performance at high wire feed speeds
- Austenitic stainless for high temperature, heat resistant applications
- The weld deposit is fully austenitic, low heat input welding procedures are needed to prevent cracking
Disclaimers
Service Information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.9 | ER310 |
| ABS | AWS A5.9 | ER310 |
| CWB | CSA W48 | ER310 |
| MIL | MIL-E-19933E AMD1 | MIL-310 |
WIRE COMPOSITION
| Classification | %C | %Cr | %Cu | %Mn | %Mo | %N | %Nb | %Ni | %P | %S | %Si |
|---|---|---|---|---|---|---|---|---|---|---|---|
| ER310 Requirement | 0.08 - 0.15 | 25.0 - 28.0 | 0.75 max. | 1.0 - 2.5 | 0.75 max. | 20.0 - 22.5 | 0.03 max. | 0.03 max. | 0.30 - 0.65 | ||
| Typical Result | 0.11-0.12 | 25.7-26.0 | 0.02-0.06 | 1.5-1.8 | 0.07-0.09 | 0.01-0.03 | 0.01 max. | 20.9-21.2 | 0.01 | 0.003 max. | 0.36-0.39 |
TYPICAL OPERATING PROCEDURES
| Diameter | Shielding Gas |
Voltage
volts |
Approx. Current
amps |
|---|---|---|---|
| 0.035 in (0.9 mm) | 98% Ar / 2% O2 | 26-29 | 160-210 |
| 0.045 in (1.1 mm) | 98% Ar / 2% O2 | 28-32 | 180-250 |
| 1/16 in (1.6 mm) | 98% Ar / 2% O2 | 29-33 | 200-280 |