DETAILS
BLUE MAX® MIG 410 ideal for use as an overlay on carbon steels to impart corrosion, erosion and abrasion resistance.
Features
- Q2 Lot® - Certified Material Test Report showing actual wire composition and Country of Origin of each lot is available online in the Certificate Center
- Proprietary surface lubricant for steady feeding and arc stability leading to exceptional performance at high wire feed speeds
- Designed to weld stainless steels of similar chemical composition as well as to overlay carbon steels to impart corrosion, erosion and abrasion resistance
- Preheat and inter-pass temperature of 400°F (200°C) or greater are recommended during welding
Typical Applications
- Surfacing Steel Mill Rolls
- Furnace and Burner Parts
- Turbine Parts
Welding Positions
- All
Shielding Gas
- 98% Ar / 2% O₂
Disclaimers
Service Information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.9 | ER410 |
| CWB | CSA W48 | ER410 |
| MIL | MIL-E-19933E AMD1 | MIL-410 |
WIRE COMPOSITION
| Classification | %C | %Cr | %Cu | %Mn | %Mo | %N | %Ni | %P | %S | %Si |
|---|---|---|---|---|---|---|---|---|---|---|
| ER410 Requirement | 0.12 max. | 11.5 - 13.5 | 0.75 max. | 0.6 max. | 0.75 max. | 0.6 max. | 0.03 max. | 0.03 max. | 0.5 max. | |
| Typical Result | 0.08-0.12 | 11.9-12.3 | 0.03-0.09 | 0.4-0.5 | 0.02-0.03 | 0.01-0.04 | 0.1-0.2 | 0.02 | 0.003 max. | 0.3-0.4 |
TYPICAL OPERATING PROCEDURES
| Diameter | Shielding Gas |
Voltage
volts |
Approx. Current
amps |
|---|---|---|---|
| 0.035 in (0.9 mm) | 98% Ar / 2% O2 | 26-29 | 160-210 |
| 0.045 in (1.1 mm) | 98% Ar / 2% O2 | 28-32 | 180-250 |
| 1/16" (1.6 mm) | 98% Ar, 2% O2 | 29-33 | 200-280 |