DETAILS
WELDING TRAINING, UP CLOSE AND PERSONAL
- Comprehensive array of tools and accessories from various welding and cutting processes
- Cutaway Harris® gas regulator and oxyfuel torch allow students to get familiar with the tool's structure, operation and application
- The Teaching Aid Toolbox is fully supported with Lincoln Electric U/LINC® curriculum lesson plans and more
- Bring actual welding and cutting tools into the classroom to better illustrate the principles of each process
- Boosts learning to the next level of understanding by illustrating joints, cuts, equipment and related techniques
- Included weld sample coupons allow instructors to illustrate various welding joints and typical beads
- A set of weld discontinuity flashcards allow you to show and discuss common weld flaws
Curriculum in a Cabinet
Build on the Basics
Bridge the Classroom and the Lab
Features
- Comprehensive array of tools and accessories from various welding and cutting processes
- Cutaway Harrisgas regulator and oxyfuel torch allow students to get familiar with the tool's structure, operation and application
- Fully supported with Lincoln Electric U/LINC curriculum lesson plans and more
- Bring actual welding and cutting tools into the classroom to better illustrate the principles of each process
- Boosts learning to the next level of understanding by illustrating joints, cuts, equipment and related techniques
Drawer 5-Weld Samples:
Butt Joint - 2 x 6 in. (50.8 x 152.4 mm) 10 ga, Corner Joint - 2 x 6 in. (50.8 x 152.4 mm) 10 ga, Edge Joint - 2 x 6 in. (50.8 x 152.4 mm) 10 ga, Lap Joint - 2 x 6 in. (50.8 x 152.4 mm) 10 ga, Tee Joint - 2 x 6 in. (50.8 x 152.4 mm) 10 ga, Three Pass T Joint 100/75/50, 1/4 x 3 x 8 in. (6.35 x 76.2 x 203.2 mm), 1/4 x 3 x 8 in. (6.35 x 76.2 x 203.2 mm), 3/8 x 8 x 7 in. (9.53 x 203.2 x 177.8 mm), Discontinuities Flash Cards
Disclaimers
Service Information
What's Included
- DRAWER 1 - SMAW:
- T300 Electrode Holder
- EH-305HD Magnum® Electrode Holder
- 200A Electrode Holder
- GC-300 Work Clamp
- 3/32 in. (2.4 mm) Bare Stick Electrode Rod
- 1/8 in. (3.2 mm) Bare Stick Electrode Rod
- 5/32 in. (4.0 mm) Bare Stick Electrode Rod
- Excalibur® 7018 MR 3/32 in. (2.4 mm) 1 lb. Tube Stick Electrode
- DRAWER 2 - GTAW:
- PTA-17V Torch Body
- PTA-17V Torch Body
- PTA-17F Torch Body
- PTA-17 Torch Handle
- PTA-17 3/32 in. (2.4 mm) Collet
- PTA-17 3/32 in. (2.4 mm) Collet Body
- PTA-17 Backcap- Long
- PTA-17 Alumina Nozzle #6 | GLK-3 Basic TIG Kit
- DRAWER 3 - GMAW|FCAW:
- Magnum® PRO 550 Assembly
- Magnum® PRO 250L Assembly
- Flux-Cored/MIG Wire Drive Roll 0.035 - .045 in. (0.9 - 1.1 mm) Knurled
- Drive Roll Kit Combination 0.035/.045 in. (0.9-1.1 mm) Solid Wire Smooth
- Magnum® PRO MIG Gun Diffuser - 550A Slip-On
- Magnum® PRO Gas Nozzle 550A - Slip-On Flush 3/4 in. ID
- Magnum® PRO Gas Nozzle 350A - Thread-On Flush 1/2 in. ID
- Magnum® PRO Gas Nozzle 350A - Thread-On Recessed 1/2 in. ID
- Magnum® PRO Bottleneck Gas Nozzle 350A - Thread-On Flush 1/2 in. ID
- Magnum® PRO Gas Nozzle 350A - 1/8 In. Stickout Thread-On1/2 in. ID
- Magnum® PRO Gas Nozzle 350A Flush - Thread-On 3/8 in. ID| Magnum® PRO MIG Gun Diffuser - 350A Slip-On
- Magnum® PRO Gas Nozzle 350A - Flush Slip-On 1/2 in. ID. Magnum® PRO MIG Gun Diffuser - 350A Extended Reach - Thread-On. Magnum® PRO Gas Nozzle 350A- Extended Reach Thread-On Recessed- 1/2 in. ID
- Magnum® PRO Contact Tip 550A 0.035 in Dia.
- Magnum® PRO Contact Tip 350A Tapered 0.035 in Dia.
- Magnum® PRO 350 Gas Diffuser Thread-On
- Magnum® PRO Barrel 550 Nozzle Assembly 550A Thread-On | Recessed 5/8 in. ID
- Magnum® PRO MIG Gun Diffuser - 550A Thread-On
- DRAWER 4 - CUTTING:
- Tomahawk® LC40 Plasma Cutting Torch Assembly
- Tomahawk® LC40 Electrode
- Tomahawk® LC40 Swirl Ring
- Tomahawk® LC40 Nozzle (40 A)
- Cutaway Harris® Oxyfuel Torch
- Cutaway Harris® Gas Regulator
- Acetylene Heating Assembly
- Acetylene Two-Piece Preheat Tip
- Cutting Tip
- DRAWER 5 - WELD SAMPLES:
- Butt Joint - 2 x 6 in. (50.8 x 152.4 mm) 10 ga.
- Corner Joint - 2 x 6 in. (50.8 x 152.4 mm) 10 ga.
- 2 x 6 in. (50.8 x 152.4 mm) 10 ga.
- Lap Joint - 2 x 6 in. (50.8 x 152.4 mm) 10 ga.
- Tee Joint - 2 x 6 in. (50.8 x 152.4 mm) 10 ga.
- Three Pass T Joint 100/75/50 -1/4 x 3 x 8 in. (6.35 x 76.2 x 203.2 mm)
- 6-Pass Groove
- 100/83/66/50/33/16 -3/8 x 8 x 7 in. (9.53 x 203.2 x 177.8 mm)
- Discontinuities Flash Cards
Documentation
Specifications
Product Weights & Dimensions
Dimensions (H x W x D) | |
Net Weight | 56.7 lbs (56.7 kg) |