DETAILS
A nickel-bearing electrode with 1/2% molybdenum.
Features
- A nickel-bearing electrode with 1/2% molybdenum
- Available as Batch Managed Inventory
- Can be used for higher strength weldments where impact properties exceeding 27 J (20 ft•lbf) at -62°C (-80°F) are required
- Suitable for use where consumables with less than 1% Ni are required
- Ink jet printing identification on entire length of electrode
Typical Applications
- Low temperature toughness requirements
- NACE
Welding Positions
- All
Shielding Gas
- 0
Disclaimers
Service Information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.28 | ER90S-G |
MECHANICAL PROPERTIES
| Classification | Shielding Gas | Polarity |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Charpy V-Notch
J (ft-lbs) @ -50°C (-60°F) |
|---|---|---|---|---|---|---|
| ER90S-G Requirement | Not Specified | DC+ | 620 (90) min. | |||
| Typical Result, As-welded | 100% Ar | DC- | 690 (100) | 790 (115) | 24 | 293-317 (216-234) |
WIRE COMPOSITION
| Classification | %C | %Cr | %Mn | %Mo | %Ni | %P | %S | %Si | %Total Cu |
|---|---|---|---|---|---|---|---|---|---|
| Typical Result | 0.10-0.13 | 0.03 | 1.77-1.84 | 0.50 | 0.85 | 0.008-0.011 | 0.003-0.004 | 0.23-0.24 | 0.09-0.17 |