Détails
Traits
- AC polarity welding
- Performs on low amperages and OCV
- Easy to strike arc
Applications typiques
- Small AC welders
- Sheet metal
- Edge, corner and butt joints
Positions de soudage
- All
Gaz de protection
- Not Applicable
Disclaimers
Des informations de service
Vous pourriez également avoir besoin
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.1 | E6011 |
MECHANICAL PROPERTIES
| Classification |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) |
Hardness Rockwell B |
|---|---|---|---|---|---|
| E6011 Requirement | 330 (48) min. | 410 (60) min. | 22 min. | 27 (20) min. | |
| Typical Result, As-welded | 450-520 (65-75) | 560-630 (82-92) | 22-30 | 38-96 (28-71) | 85-92 |
DEPOSIT COMPOSITION
| Classification | %C | %Cr | %Mn | %Mo | %Ni | %P | %S | %Si | %V |
|---|---|---|---|---|---|---|---|---|---|
| E6011 Requirement | 0.20 max. | 0.20 max. | 1.20 max. | 0.30 max. | 0.30 max. | 1.00 max. | 0.08 max. | ||
| Typical Result | 0.15-0.20 | 0.02-0.05 | 0.60-0.71 | 0.01 max. | 0.03 max. | 0.004-0.013 | 0.004-0.009 | 0.35-0.60 | 0.01 |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity⁽¹⁾ |
Current
Amps |
|---|---|---|
| 3/32 in (2.4 mm) | AC | 40-90 |
| 3/32 in (2.4 mm) | DC± | 40-80 |
| 1/8 in (3.2 mm) | AC | 65-120 |
| 1/8 in (3.2 mm) | DC± | 60-110 |
| 5/32 in (4.0 mm) | AC | 115-150 |
| 5/32 in (4.0 mm) | DC± | 105-135 |
NOTES
| Note |
|---|
| ⁽¹⁾ Preferred polarity is listed first. |