Menu Close
Submerged Arc Family

Diameters / Packaging

Diameters
 50 lb Bag
Flux ED027861

Lincolnweld® 980®

Submerged Arc Welding (SAW)

Neutral welding flux recommended for semiautomatic general fabrication.

Diamètre

Sélectionnez le diamètre

  • Flux

Paquet

Sélectionnez un forfait

  • 50 lb Bag
Acheter maintenant

Détails

Traits

  • Combines many of the features of the 700 and 800 series fluxes and is ideal for semiautomatic submerged arc welding
  • Exceptional resistance to flash-through and porosity caused by arc blow in a variety of applications
  • Especially high productivity when used with Lincolnweld® LC-72 wire
  • Actual (Type 3.1) certificates for each lot of flux showing chemical composition, particle size and moisture level are available in the certificate center of lincolnelectric.com
  • Mild Steel Lincolnweld® L-50®, L-61®, LC-72 Low Alloy Steel Lincolnweld® LA-75, LAC-Ni2

Applications typiques

  • Semiautomatic, single and multiple pass submerged arc welding
  • General purpose fabrication
  • Fillet welds

Caractéristiques spéciales

  • Basicity Index: 0.6 Density: 1.4 g/cm3

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Des informations de service

Vous pourriez également avoir besoin

NA-5 Control

Contrôle NA-5

K356-2
NA-4 Control Box

NA-4 Controller

K388-2
LT-7 Tractor

Tracteur LT-7 (modèle sur chenilles)

K395-1
500 lb Accu-Trak Drum, 600 lb Accu- Trak Drum, 1000 Accu-Pak Drum

Lincolnweld® L-50® Submerged Arc (SAW) Wire

ED011322
500 lb Accu-Trak Drum, 600 lb Accu- Trak Drum, 1000 Accu-Pak Drum

Lincolnweld® L-50® Submerged Arc (SAW) Wire

ED011327
500 lb Accu-Trak Drum, 600 lb Accu- Trak Drum, 1000 Accu-Pak Drum

Lincolnweld® L-50® Submerged Arc (SAW) Wire

ED011331
Submerged Arc Wire

Lincolnweld® L-50® Submerged Arc (SAW) Wire

ED011332
500 lb Accu-Trak Drum, 600 lb Accu- Trak Drum, 1000 Accu-Pak Drum

Lincolnweld® L-50® Submerged Arc (SAW) Wire

ED011334

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

MECHANICAL PROPERTIES

Wire Classification Postweld Heat Treatment Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F)
Lincolnweld® L-50® F7A2-EM13K-H8 As-welded 430 (62) 520 (75) 30 28 (21)
Lincolnweld® L-61® F7A2-EM12K-H8 As-welded 420 (61) 510 (74) 30 113 (83)
Lincolnweld® LA-75 F7A2-ENi1K-Ni1-H8 As-welded 460 (66) 560 (81) 30 99 (73)
Lincolnweld® LAC-Ni2 F8A2-ECNi2-Ni2-H8 As-welded 480 (69) 570 (83) 29 117 (86)
Lincolnweld® LC-72 F7A2-EC1-H8 As-welded 440 (64) 520 (76) 27 28 (21)

DEPOSIT COMPOSITION

Wire Classification %C %Cr %Cu %Mn %Mo %Ni %P %S %Si %Ti+V+Zr Diffusible Hydrogen
mL/100g Weld Metal
Lincolnweld® L-50® F7A2-EM13K-H8 0.04 0.07 1.67 0.019 0.009 0.46 2
Lincolnweld® L-61® F7A2-EM12K-H8 0.06 0.09 1.46 0.023 0.011 0.32 4
Lincolnweld® LA-75 F7A2-ENi1K-Ni1-H8 0.05 0.04 0.10 1.56 0.00 0.80 0.007 0.008 0.60 0.02 3
Lincolnweld® LAC-Ni2 F8A2-ECNi2-Ni2-H8 0.04 0.04 1.32 2.19 0.016 0.011 0.25 2
Lincolnweld® LC-72 F7A2-EC1-H8 0.04 0.02 1.63 0.024 0.011 0.55 3

FLUX COMPOSITION

Classification %Al2O3 %CaF2 %FeO %MgO %MnO %Na2O %SiO2 %TiO2
Typical Result 43 12 2 3 16 2 14 7