Détails
Low Alloy steels designed for rebuilding of carbon or low alloy parts used in applications involving non-lubricated rolling or sliding Metal-to-Metal wear.
Traits
- Metal-cored wire that is most widely used for caster roll rebuilding
- Best in class castor roll rebuilding
- Works well with Lincolweld 801 or 802 Flux
Applications typiques
- Caster rolls
Positions de soudage
- Flat/Horizontal
Disclaimers
Des informations de service
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
MECHANICAL PROPERTIES
| Flux | Classification | Hardness Rockwell C |
|---|---|---|
| Lincolnweld® 802® | Typical Result | 49-52 |
DEPOSIT COMPOSITION
| Classification | %C | %Cr | %Mn | %Si |
|---|---|---|---|---|
| Typical Result | 0.2 | 11.9 | 1.2 | 0.6 |
TYPICAL OPERATING PROCEDURES
| Diameter |
Wire Feed Speed
m/min (in/min) |
Voltage
volts |
Approx. Current
amps |
|---|---|---|---|
| 3/32" (2.4 mm) | 1.7 (65) | 24 | 250 |
| 3/32" (2.4 mm) | 3.0 (120) | 28 | 375 |
| 3/32" (2.4 mm) | 4.4 (175) | 31 | 450 |
| 1/8" (3.2 mm) | 1.5 (60) | 26 | 350 |
| 1/8" (3.2 mm) | 2.5 (100) | 28 | 500 |
| 1/8" (3.2 mm) | 3.6 (140) | 30 | 625 |