Menu Close
Hardfacing Consumables Family Group

Diameters / Packaging

Diameters
 300 lb (136 kg) Speed-Feed® Drum
 600 lb (272 kg) Speed-Feed® Drum
1/8 in (3.2 mm) ED029264 ED029161

Lincore® 42-S

Metal-Cored Submerged Arc (SAW)

LINCORE® 42-S Metal-Cored Submerged Arc Wire designed for rebuilding heavy equipment on tractor rollers, tractor idlers and track pads intended to resist rolling and sliding wear applications (Metal-to-Metal)

Diamètre

Sélectionnez le diamètre

  • 1/8 in (3.2 mm)

Paquet

Sélectionnez un forfait

  • 300 lb (136 kg) Speed-Feed® Drum
  • 600 lb (272 kg) Speed-Feed® Drum
Acheter maintenant

Détails

LINCORE® 42-S produces low alloy manganese, chromium and molybdenum with improved metal resistance against wear, offers higher crack resistance and toughness to be used with recommended Lincoln weld® 801, 802, 860, and 880 standard flux for automatic and semiautomatic operations.

Traits

  • Designed for rebuilding heavy equipment undercarriages
  • The deposit exhibits enhanced crack resistance and toughness compared to Lincore® 40-S
  • Intended to resist rolling and sliding metal-to-metal wear
  • For automatic and semiautomatic operation.

Applications typiques

  • Tractor rollers
  • Tractor rollers
  • Tractor idlers
  • Track pads

Positions de soudage

  • Flat/Horizontal

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Des informations de service

Vous pourriez également avoir besoin

500 lb Accu-Trak Drum, 600 lb Accu- Trak Drum, 1000 Accu-Pak Drum

Lincore® 30-S Metal-Cored Submerged Arc (SAW) Wire

ED011199
500 lb Accu-Trak Drum, 600 lb Accu- Trak Drum, 1000 Accu-Pak Drum

Lincore® 40-S Metal-Cored Submerged Arc (SAW) Wire

ED015909
T4F SAE-500

Lincolnweld® 801®

ED019588
Craft wire drum

Lincore® 32-S Metal-Cored Submerged Arc (SAW) Wire

ED025656
Voir tout

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

MECHANICAL PROPERTIES

Flux Classification Number of layer Hardness Rockwell C
Lincolnweld® 801® Typical Result 1 39-40
Lincolnweld® 801® Typical Result 2 38-41
Lincolnweld® 801® Typical Result 4 38-41
Lincolnweld® 801® Typical Result 6 39-42

DEPOSIT COMPOSITION

Flux Classification Number of layer CTWD
mm (in.) 		%C %Cr %Mn %Mo %Si
Lincolnweld® 801® Typical Result 1 Layer 25 (1) 0.14 1.45 2.13 0.43 0.34
Lincolnweld® 801® Typical Result 2 Layers 25 (1) 0.12 2.22 2.70 0.66 0.39
Lincolnweld® 801® Typical Result 4 Layers 25 (1) 0.11 2.95 3.33 0.84 0.44
Lincolnweld® 801® Typical Result 6 Layers 25 (1) 0.10 3.20 3.51 0.80 0.46
Lincolnweld® 801® Typical Result 1 Layer 48 (1⁷/₈) 0.14 2.02 2.49 0.60 0.33
Lincolnweld® 801® Typical Result 2 Layers 48 (1⁷/₈) 0.13 2.96 3.05 0.84 0.42
Lincolnweld® 801® Typical Result 4 Layers 48 (1⁷/₈) 0.13 3.15 3.41 0.99 0.47
Lincolnweld® 801® Typical Result 6 Layers 48 (1⁷/₈) 0.13 3.31 3.55 1.06 0.51

TYPICAL OPERATING PROCEDURES

Diameter Polarity Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps
1/8 in (3.2 mm) DC+ 1.3 (50) 27 350
1/8 in (3.2 mm) DC+ 2.5 (100) 28 565
1/8 in (3.2 mm) DC+ 3.2 (125) 29 675
1/8 in (3.2 mm) DC+ 1.3 (50) 27 325
1/8 in (3.2 mm) DC+ 2.5 (100) 28 510
1/8 in (3.2 mm) DC+ 3.2 (125) 29 605