Diameters / Packaging
|
Diameters |
33 lb Spool |
33 lb Spool Buy America |
44 lb Spool |
44 LB SPOOL |
44 lb Spool Buy America |
60 lb Spool |
500 lb Accu-Pak® Box |
500 lb Accu-Trak® Drum |
500 LB DRUM |
500 lb Infinity-Pak® |
600 lb Speed Feed® Drum |
900 lb Accu-Pak® Box |
1000 lb Accu-Pak® Box |
1000 lb Accu-Trak® Drum |
1000 LB DRUM |
1000 lb Infinity-Pak |
1000 lb Precise-Trak® Reel |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.030 in (0.8 mm) | ED031407,ED032923 | ED029223 | |||||||||||||||
| 0.035 IN | ED561005 | ED561200 | |||||||||||||||
| 0.035 in (0.9 mm) | ED031408,ED032924 | ED021268,ED031914 | ED036624 | ED021269 | ED032899 | ED021052 | ED032842 | ED028825 | ED032379 | ||||||||
| 0.040 in (1.0 mm) | ED033292 | ||||||||||||||||
| 0.045 IN | ED561011 | ED561201 | ED561224 | ||||||||||||||
| 0.045 in (1.1 mm) | ED031409,ED032925 | ED036879 | ED021270,ED031915 | ED034428 | ED021271 | ED032901 | ED020526 | ED034535 | ED032844 | ED028826 | ED031930 | ED031614 | |||||
| 0.052 IN | ED561202 | ||||||||||||||||
| 0.052 in (1.3 mm) | ED031916 | ED021273 | ED032902 | ED020527 | ED032845 | ED029082 | ED031615 | ||||||||||
| 1/16 in (1.6 mm) | ED027274 | ED032903 | ED011316 | ED032846 | ED029083 | ED033270 |
Détails
Notre fil MIG le plus populaire, SuperArc® L-50®, fil revêtu de cuivre de qualité supérieure, est un excellent choix pour les matériaux de base en acier au carbone à limite d'élasticité de 50 000 psi (345 MPa).
Traits
- Niveaux modérés de manganèse et de silicium pour la désoxydation des surfaces propres ou à niveau faible de calamine
- Alimentation et stabilité de l'arc supérieures
- Revêtement en cuivre pour une longue durée de vie de la pointe de contact
- Prend en charge le transfert par court-circuit, le transfert globulaire, le transfert par pulvérisation axiale et le transfert par pulvérisation pulsée
Disclaimers
Des informations de service
Vous pourriez également avoir besoin
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.18 | ER70S-3 |
| ABS | ABS - Part 2 | 3YSA H5 |
| CWB | CSA W48 | B-G 49A 3 C1 S3 (B-G 49A 3 C1 G3) |
| DNV-GL | DNV - 2.9 | III YMS H5 |
| LR | LR - Chapter 11 | 3YS H5 |
| MIL | MIL-E-23765/1D | MIL-70S-3 |
| MIL | MIL-E-23765/1E | MIL-70S-3 |
MECHANICAL PROPERTIES
| Classification | Shielding Gas | Polarity |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Charpy V-Notch
J (ft-lbs) @ -20°C (0°F) |
Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) |
|---|---|---|---|---|---|---|---|
| Typical Result, As-welded | 100% CO2 | DC+ | 400 (58) | 500-560 (73-81) | 24 | 95-132 (70-98) | 95-106 (70-78) |
WIRE COMPOSITION
| Classification | %C | %Cr | %Mn | %Mo | %Ni | %P | %S | %Si | %Total Cu | %V |
|---|---|---|---|---|---|---|---|---|---|---|
| ER70S-3 Requirement | 0.06 - 0.15 | 0.15 max. | 0.90 - 1.40 | 0.15 max. | 0.15 max. | 0.025 max. | 0.035 max. | 0.45 - 0.75 | 0.50 max. | 0.03 max. |
| Typical Result | 0.06-0.11 | 0.02-0.04 | 1.15-1.24 | 0.02 max. | 0.01-0.04 | 0.004-0.012 | 0.004-0.011 | 0.44-0.62 | 0.00 max. | 0.12-0.27 |
TYPICAL OPERATING PROCEDURES
| Diameter | Transfer Mode | Shielding Gas | Polarity |
CTWD
mm (in.)⁽¹⁾ |
Wire Feed Speed
m/min (in/min) |
Voltage
volts |
Approx. Current
amps |
Melt-off Rate
kg/hr (lb/hr) |
|---|---|---|---|---|---|---|---|---|
| 0.030 in (0.8 mm) | Short Circuit Transfer | 100% CO2 | DC+ | 9-12 (3/8-1/2) | 1.9 (75) | 17 | 35 | 0.4 (0.9) |
| 0.030 in (0.8 mm) | Short Circuit Transfer | 100% CO2 | DC+ | 9-12 (3/8-1/2) | 3.8 (150) | 18 | 70 | 0.8 (1.8) |
| 0.030 in (0.8 mm) | Short Circuit Transfer | 100% CO2 | DC+ | 9-12 (3/8-1/2) | 7.6 (300) | 22 | 130 | 1.6 (3.6) |
| 0.035 in (0.9 mm) | Short Circuit Transfer ⁽²⁾ | 100% CO2 | DC+ | 9-12 (3/8-1/2) | 2.5 (100) | 18 | 80 | 0.7 (1.6) |
| 0.035 in (0.9 mm) | Short Circuit Transfer ⁽²⁾ | 100% CO2 | DC+ | 9-12 (3/8-1/2) | 3.8 (150) | 19 | 120 | 1.1 (2.4) |
| 0.035 in (0.9 mm) | Short Circuit Transfer ⁽²⁾ | 100% CO2 | DC+ | 9-12 (3/8-1/2) | 6.4 (250) | 22 | 175 | 1.8 (4.0) |
| 0.035 in (0.9 mm) | Spray Transfer | 90% Ar / 10% CO2 | DC+ | 12-19 (1/2-3/4) | 9.5 (375) | 23 | 195 | 2.7 (6.0) |
| 0.035 in (0.9 mm) | Spray Transfer | 90% Ar / 10% CO2 | DC+ | 12-19 (1/2-3/4) | 12.7 (500) | 29 | 230 | 3.6 (8.0) |
| 0.035 in (0.9 mm) | Spray Transfer | 90% Ar / 10% CO2 | DC+ | 12-19 (1/2-3/4) | 15.2 (600) | 30 | 275 | 4.4 (9.6) |
| 0.045 in (1.1 mm) | Short Circuit Transfer ⁽²⁾ | 100% CO2 | DC+ | 12-19 (1/2-3/4) | 3.2 (125) | 19 | 145 | 1.5 (3.4) |
| 0.045 in (1.1 mm) | Short Circuit Transfer ⁽²⁾ | 100% CO2 | DC+ | 12-19 (1/2-3/4) | 3.8 (150) | 20 | 165 | 1.8 (4.0) |
| 0.045 in (1.1 mm) | Short Circuit Transfer ⁽²⁾ | 100% CO2 | DC+ | 12-19 (1/2-3/4) | 5.1 (200) | 21 | 200 | 2.4 (5.4) |
| 0.045 in (1.1 mm) | Spray Transfer | 90% Ar / 10% CO2 | DC+ | 12-19 (1/2-3/4) | 8.9 (350) | 27 | 285 | 4.2 (9.2) |
| 0.045 in (1.1 mm) | Spray Transfer | 90% Ar / 10% CO2 | DC+ | 12-19 (1/2-3/4) | 12.1 (475) | 30 | 335 | 5.7 (12.5) |
| 0.045 in (1.1 mm) | Spray Transfer | 90% Ar / 10% CO2 | DC+ | 12-19 (1/2-3/4) | 12.7 (500) | 30 | 340 | 6.0 (13.2) |
| 0.052 in (1.3 mm) | Spray Transfer | 90% Ar / 10% CO2 | DC+ | 12-19 (1/2-3/4) | 7.6 (300) | 30 | 300 | 4.8 (10.6) |
| 0.052 in (1.3 mm) | Spray Transfer | 90% Ar / 10% CO2 | DC+ | 12-19 (1/2-3/4) | 8.1 (320) | 30 | 320 | 5.2 (11.5) |
| 0.052 in (1.3 mm) | Spray Transfer | 90% Ar / 10% CO2 | DC+ | 12-19 (1/2-3/4) | 12.3 (485) | 32 | 430 | 7.8 (17.1) |
| 1/16 in (1.6 mm) | Spray Transfer | 90% Ar / 10% CO2 | DC+ | 12-25 (1/2-1) | 5.3 (210) | 25 | 325 | 4.8 (10.7) |
| 1/16 in (1.6 mm) | Spray Transfer | 90% Ar / 10% CO2 | DC+ | 12-25 (1/2-1) | 6.0 (235) | 27 | 350 | 5.4 (12.0) |
| 1/16 in (1.6 mm) | Spray Transfer | 90% Ar / 10% CO2 | DC+ | 12-25 (1/2-1) | 7.4 (290) | 28 | 430 | 6.7 (14.8) |
NOTES
| Note |
|---|
| ⁽¹⁾ CTWD (Contact Tip to Work Distance). Subtract 1/4 in (6.4 mm) to calculate Electrical Stickout |
| ⁽²⁾ Procedures in these areas are procedures for short circuiting mode using 100% CO2. When using 75% Argon, 25% CO2 for short circuit transfer, reduce voltage by 1 to 2 volts. |