Menu zamknij
10 Pound Cans of Stick Electrode

Średnica / Opakowanie

Średnice
 (3) 10 lb Easy Open Can
5/32 x 14 in (4.0 x 350 mm) ED032633

Pipeliner® LH-D100

Stick (SMAW)

KLASYFIKACJE:
AWS A5.5 : E10045-P2 H4R

Low Alloy, Low Hydrogen, Pipe • AWS E10045-P2 H4R

Średnica

Wybierz średnicę

  • 5/32 x 14 in (4.0 x 350 mm)

Zestaw

Wybierz pakiet

  • (3) 10 lb Easy Open Can

Wprowadzenie

See our educational video for technique and tips

Zalety

  • 80% higher productivity over traditional vertical-up pipe welding
  • Durable coating
  • 80% higher productivity over traditional vertical-up pipe welding

Zastosowania standardowe

  • Fill and cap pass welding of up to X90 grade pipe
  • Pipe repair
  • Hot tapping

Pozycja spawania

  • All

Gaz osłonowy

  • Not Applicable

Cechy charakterystyczne

  • Designed for low hydrogen vertical down welding on pipe

Informacje o usługach

Możesz także potrzebować

10 lb cans of Pipeliner LH-D stick electrode

PIPELINER® LH-D80

ED032627
10 lb cans of Pipeliner LH-D stick electrode

PIPELINER® LH-D90

ED032630

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. Strona wyszukiwania kart SDS

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.5 E10045-P2 H4R
CWB CWB AWS A5.5 E6945-P2-H4R (E10045-P2-H4R)

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) 		Charpy V-Notch
J (ft-lbs) @ -40°C (-40°F) 		Hardness Rockwell B
E10045-P2 H4R Requirement 600 (87) min. 690 (100) min. 16 min. 27 (20) min.
Typical Result, As-welded 650-700 (94-102) 710-750 (103-108) 23-26 77-114 (57-84) 42-85 (31-62) 96-99

DEPOSIT COMPOSITION

Classification %B %C %Cr %Mn %Mo %Ni %P %S %Si %V Diffusible Hydrogen
mL/100g Weld Metal 		1800F H2O - As received 1800F H2O - After 9 hrs at 80F/80%RH
E10045-P2 H4R Requirement 0.12 max. 0.20 max. 0.90 - 1.70 0.50 max. 1.00 max. 0.03 max. 0.03 max. 0.80 max. 0.05 max. 4 max. 0.15 max. 0.4 max.
Typical Result 0.004-0.0051 0.05-0.06 0.04-0.06 1.44-1.67 0.40-0.46 0.78-0.89 0.01 0.01 0.42-0.56 0.01 2-4 0.03-0.13 0.2-0.4

TYPICAL OPERATING PROCEDURES

Diameter Polarity Current
Amps
3.2 mm (1/8 in) DC+ 120-170
4.0 mm (5/32 in) DC+ 170-250
4.5 mm (11/64 in) DC+ 200-300

NOTES

Note
NOTE: This product contains micro-alloying elements. Additional information available on request.