Meniu Închidere
Special Alloys Packaging - MIG-TIG wires

Diametre / Ambalaj

Diametre
 5.0 KG PE tube
2.4 mm T9CRMO-24

9CRMO TIG (GTAW) Cut Lengths

Sudare WIG | T9CRMO-24

CLASIFICARI:
AWS A5.28M : ER80S-B8
EN ISO 21952-A : W CrMo9

ER80S-B8

Diametru

Selectare diametru

  • 2.4 mm

Ambalaj

Selectare ambalaj

  • 5.0 KG PE tube

DETALII

Low Alloy Steel • AWS A5.28M ER80S-B8

Caracteristici

  • B8 alloyed steel: 9% chromium, 1% molybdenum martensitic alloy for elevated temperature service up to 600°C (1112°F)
  • Designed for high strength and improved corrosion resistance in superheated steam, hot hydrogen gas and high sulphur crude oils where higher performance than 5% chromium, 0.5% molybdenum steels is required

Informații despre service

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. Pagina de căutare FDS

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.28 ER80S-B8

MECHANICAL PROPERTIES

Classification Postweld Heat Treatment Shielding Gas Polarity Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
%
ER80S-B8 Requirement 100% Ar DC- 470 (68) min. 550 (80) min. 17 min.
Typical Result, Stress relieved 1 hour @ 745°C (1375°F) 100% Ar DC- 600 (88) 720 (104) 23

WIRE COMPOSITION

Classification %C %Cr %Mn %Mo %Ni %P %S %Si %Total Cu
ER80S-B8 Requirement 0.10 max. 8.00 - 10.50 0.40 - 0.70 0.80 - 1.20 0.50 max. 0.025 max. 0.025 max. 0.50 max. 0.35 max.
Typical Result 0.09 8.58 0.51 0.94 0.08 0.016 0.002 0.42 0.05