Diametre / Ambalaj
|
Diametre |
15 KG SPOOL |
|---|---|
| 1.1 mm | ED035151 |
DETALII
BLUE MAX® MIG 630 ideal for welding precipitation hardened stainless steels, heat treatment of material will obtain higher strength and greatly influence mechanical properties
Caracteristici
- Q2 Lot® - Certified Material Test Report showing actual wire composition and Country of Origin of each lot is available online in the Certificate Center
- Proprietary surface lubricant for steady feeding and arc stability leading to exceptional performance at high wire feed speeds
- Heat treatment of material will obtain higher strength, and greatly influence mechanical properties
- Precipitation hardening, martensitic stainless steel
Aplicații tipice
- Hydraulic Equipment Components
- Impellers
- Pump Shafts
- Welding 17-4 PH stainless steels
Poziții de sudare
- All
Gaz protector
- 98% Ar / 2% O₂
Informații despre service
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. Pagina de căutare FDS
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.9 | ER630 |
| CWB | CSA W48 | ER630 |
WIRE COMPOSITION
| Classification | %C | %Cr | %Cu | %Mn | %Mo | %N | %Nb | %Ni | %P | %S | %Si | Ferrite Number (Delong ©) | Ferrite Number (WRC-1992 ©) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ER630 Requirement | 0.05 max. | 16.00 - 16.75 | 3.25 - 4.00 | 0.25 - 0.75 | 0.75 max. | 0.15 - 0.30 | 4.5 - 5.0 | 0.03 max. | 0.03 max. | 0.75 max. | |||
| Typical Result | 0.02-0.03 | 16.48-16.60 | 3.43-3.60 | 0.57-0.58 | 0.09-0.14 | 0.02-0.04 | 0.22-0.25 | 4.6-4.7 | 0.02 | 0.003 max. | 0.44-0.46 | 20 | 19 |
TYPICAL OPERATING PROCEDURES
| Diameter | Shielding Gas |
Voltage
volts |
Approx. Current
amps |
|---|---|---|---|
| 0.035 in (0.9 mm) | 98% Ar / 2% CO2 | 26-29 | 160-210 |
| 0.045 in (1.1 mm) | 98% Ar / 2% CO2 | 28-32 | 180-250 |
| 1/16" (1.6 mm) | 98% Ar, 2% CO2 | 29-33 | 200-280 |