You can view the site in Turkish or English language. Visit Website

Menü Kapat
Innershield Family

Çaplar / Paketleme

Çaplar
 4.5 KG SPOOL
 11.3 KG SPOOL
0.9 mm ED016354 ED030637
1.1 mm ED016363 ED030638

Innershield® NR®-211-MP

Kendinden Korumalı Özlü Tel (FCAW-S)

AWS:
A5.20/A5.36 : E71T-11

Innershield® NR-211®-MP from Lincoln Electric is a versatile wire suitable for all-position welding of light gauge or thin plate.

Çap

Çap Seçin

  • 0.9 mm
  • 1.1 mm

Paket

Paket Seç

  • 4.5 KG SPOOL
  • 11.3 KG SPOOL

DETAYLAR

A versatile wire suitable for all-position welding of light gauge or thin plate. Recommended for maximum plate thicknesses in the range of 7.9 mm (5/16 in) to 12.7 mm (1/2 in).

Özellikleri

  • Versatile welding capability on a variety of base materials
  • High operator appeal and good bead appearance
  • Easy slag removal
  • Fast freezing characteristics accommodate poor fit-up

Tipik Uygulamalar

  • Sheet or thin gauge metal
  • Galvanized sheet metal
  • Robotic/hard automation
  • General fabrication
  • 5/16" maximum plate thickness for 0.045" and smaller diameters. 1/2" maximum plate thickness for 0.068 - 3/32" diameters.

Kaynaklama Konumları

  • All

Koruyucu gaz

  • N/A

Servis Bilgileri

Belgeler

Ayrıca İhtiyacınız Olabilir

Innershield Flux Cored wire, 25 or 30 lb steel spool

Innershield® NR® -211-MP

ED030638
Image not found

Magnum® Kontak Meme - Standart, 0,035 inç (0,9 mm) - 10/paket

KP14-35
Image not found

Magnum® Kontak Meme - Standart, 0,045 inç (1,2 mm) - 10/paket

KP11-45
Image not found

Magnum® Kontak Meme - Standart, 0,045 inç (1,2 mm) - 10/paket

KP14-45
Tümünü görüntüle

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Arama sayfası

Test sonucunu görün sorumluluk reddi

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.20 E71T-11
ABS AWS A5.20 E71T-11
CWB CSA W48 E491T-11-AZ-CS3-H16 (E491T-11-H16)
DB ISO 17632-A T 42 Z Z NO 1 H10

MECHANICAL PROPERTIES

Classification Polarity Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
%
E71T-11 Requirement DC- 400 (58) min. 480-660 (70-95) 20 min.
Typical Result, As-welded DC- 420 (61) 570-640 (82-92) 22

DEPOSIT COMPOSITION

Classification Polarity %Al %C %Mn %P %S %Si
E71T-11 Requirement DC- 0.30 max. 1.75 max. 0.03 max. 0.03 max. 0.60 max.
Typical Result DC- 1.2-1.6 0.15-0.28 0.53-0.79 0.012 0.004 0.13-0.28

TYPICAL OPERATING PROCEDURES

Diameter Polarity CTWD
mm (in.) 		Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps 		Melt-off Rate
kg/hr (lb/hr) 		Deposition Rate
kg/hr (lb/hr) 		Efficiency
%
0.030 in (0.8 mm) DC- 13 (1/2) 1.3 (50) 13-14 30 0.2 (0.5) 0.2 (0.4) 81
0.030 in (0.8 mm) DC- 13 (1/2) 2.5 (100) 13-14 60 0.5 (1.1) 0.4 (0.8) 75
0.030 in (0.8 mm) DC- 13 (1/2) 3.8 (150) 14-15 80 0.7 (1.6) 0.6 (1.2) 78
0.030 in (0.8 mm) DC- 13 (1/2) 5.1 (200) 14-15 100 1.0 (2.1) 0.8 (1.7) 81
0.030 in (0.8 mm) DC- 13 (1/2) 6.4 (250) 15-16 130 1.2 (2.6) 1.0 (2.1) 80
0.030 in (0.8 mm) DC- 13 (1/2) 7.6 (300) 18-19 140 1.4 (3.2) 1.2 (2.6) 81
0.035 in (0.9 mm) DC- 13-16 (1/2-5/8) 1.3 (50) 14-15 30 0.4 (0.8) 0.3 (0.7) 81
0.035 in (0.9 mm) DC- 13-16 (1/2-5/8) 1.8 (70) 15-16 60 0.5 (1.2) 0.5 (1.0) 83
0.035 in (0.9 mm) DC- 13-16 (1/2-5/8) 2.8 (110) 16-17 115 0.7 (1.6) 0.6 (1.3) 78
0.035 in (0.9 mm) DC- 13-16 (1/2-5/8) 3.8 (150) 17-18 130 1.0 (2.2) 0.8 (1.7) 78
0.035 in (0.9 mm) DC- 13-16 (1/2-5/8) 5.1 (200) 18-19 155 1.4 (3.0) 1.1 (2.5) 84
0.035 in (0.9 mm) DC- 13-16 (1/2-5/8) 7.0 (275) 20-21 155 2.0 (4.4) 1.5 (3.4) 78
.045" (1.1 mm) DC- 13 (1/2) 1.8 (70) 15-16 120 0.7 (1.6) 0.5 (1.1) 69
.045" (1.1 mm) DC- 13 (1/2) 2.3 (90) 16-17 140 1.0 (2.2) 0.8 (1.7) 77
.045" (1.1 mm) DC- 13 (1/2) 2.8 (110) 17-18 160 1.2 (2.7) 1.0 (2.3) 85
.045" (1.1 mm) DC- 13 (1/2) 3.3 (130) 18-19 170 1.5 (3.2) 1.2 (2.7) 84
0.068 in (1.7 mm) DC- 19-32 (3/4-1 1/4) 1.0 (40) 15-16 125 1.0 (2.1) 0.8 (1.7) 81
0.068 in (1.7 mm) DC- 19-32 (3/4-1 1/4) 1.9 (75) 18-19 190 1.8 (4.0) 1.5 (3.4) 85
0.068 in (1.7 mm) DC- 19-32 (3/4-1 1/4) 3.3 (130) 20-21 270 3.2 (7.0) 2.8 (6.1) 88
0.068 in (1.7 mm) DC- 19-32 (3/4-1 1/4) 4.4 (175) 23-24 300 4.3 (9.4) 3.8 (8.4) 89
5/64 in (2.0 mm) DC- 19-32 (3/4-1 1/4) 1.3 (50) 16-17 180 1.6 (3.5) 1.3 (2.9) 83
5/64 in (2.0 mm) DC- 19-32 (3/4-1 1/4) 1.9 (75) 18-19 235 2.4 (5.3) 2.0 (4.5) 85
5/64 in (2.0 mm) DC- 19-32 (3/4-1 1/4) 3.0 (120) 20-21 290 3.8 (8.4) 3.4 (7.4) 88
5/64 in (2.0 mm) DC- 19-32 (3/4-1 1/4) 4.1 (160) 22-23 325 5.1 (11.2) 4.5 (10.0) 89
3/32 in (2.4 mm) DC- 19-32 (3/4-1 1/4) 1.3 (50) 16-17 245 2.3 (5.0) 1.9 (4.2) 84
3/32 in (2.4 mm) DC- 19-32 (3/4-1 1/4) 1.9 (75) 19-20 305 3.4 (7.5) 2.9 (6.4) 85
3/32 in (2.4 mm) DC- 19-32 (3/4-1 1/4) 2.5 (100) 20-21 365 4.5 (10.0) 3.9 (8.7) 87
3/32 in (2.4 mm) DC- 19-32 (3/4-1 1/4) 3.3 (130) 22-23 400 5.9 (12.9) 5.1 (11.3) 88