Çaplar / Paketleme
|
Çaplar |
Can 22,7 kg |
|---|---|
| 2.5x350 mm | ED030916 |
DETAYLAR
Mild steel stick electrode designed for low hydrogen, vertical up capability on X60 grade pipe.
Özellikleri
- DC- (DCEN) is the recommended polarity for root pass welding on pipe
Servis Bilgileri
Ayrıca İhtiyacınız Olabilir
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Arama sayfası
Test sonucunu görün sorumluluk reddi
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.1 | E7016-1 H4, E7016-H4 |
| ABS | AWS A5.1 | E7016-H4 |
| CWB | AWS A5.1M | E4916-H4 |
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.1 | E7016-1 H4, E7016-H4 |
| ABS | AWS A5.1 | E7016-H4 |
| CWB | AWS A5.1M | E4916-H4 |
MECHANICAL PROPERTIES
| Classification |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Charpy V-Notch
J (ft-lbs) @ -40°C (-40°F) |
Charpy V-Notch
J (ft-lbs) @ -45°C (-50°F) |
|---|---|---|---|---|---|
| E7016-1 H4 Requirement | 400 (58) min. | 480 (70) min. | 22 min. | 27 (20) min. | |
| Typical Result, As-welded | 420-550 (61-79) | 510-640 (74-93) | 25-41 | 27-186 (20-137) | 29-168 (22-124) |
| Classification |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Charpy V-Notch
J (ft-lbs) @ -40°C (-40°F) |
Charpy V-Notch
J (ft-lbs) @ -45°C (-50°F) |
|---|---|---|---|---|---|
| E7016-1 H4 Requirement | 400 (58) min. | 480 (70) min. | 22 min. | 27 (20) min. | |
| Typical Result, As-welded | 420-550 (61-79) | 510-640 (74-93) | 25-41 | 27-186 (20-137) | 29-168 (22-124) |
DEPOSIT COMPOSITION
| Classification | %C | %Cr | %Mn | %Mo | %Ni | %P | %S | %Si | %V | %Mn+Ni+Cr+Mo+V |
Diffusible Hydrogen
mL/100g Weld Metal |
1800F H2O - As received |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| E7016-1 H4 Requirement | 0.15 max. | 0.20 max. | 1.60 max. | 0.30 max. | 0.30 max. | 0.035 max. | 0.035 max. | 0.75 max. | 0.08 max. | 1.75 max. | 4 max. | 0.6 max. |
| Typical Result | 0.04-0.08 | 0.02-0.05 | 1.03-1.47 | 0.02 max. | 0.01-0.04 | 0.008-0.014 | 0.003-0.012 | 0.32-0.57 | 0.02 max. | 1.09-1.48 | 1-4 | 0.3 max. |
| Classification | %C | %Cr | %Mn | %Mo | %Ni | %P | %S | %Si | %V | %Mn+Ni+Cr+Mo+V |
Diffusible Hydrogen
mL/100g Weld Metal |
1800F H2O - As received |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| E7016-1 H4 Requirement | 0.15 max. | 0.20 max. | 1.60 max. | 0.30 max. | 0.30 max. | 0.035 max. | 0.035 max. | 0.75 max. | 0.08 max. | 1.75 max. | 4 max. | 0.6 max. |
| Typical Result | 0.04-0.08 | 0.02-0.05 | 1.03-1.47 | 0.02 max. | 0.01-0.04 | 0.008-0.014 | 0.003-0.012 | 0.32-0.57 | 0.02 max. | 1.09-1.48 | 1-4 | 0.3 max. |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity⁽¹⁾ |
Current
Amps |
|---|---|---|
| 2.5 mm (3/32 in) | DC± | 55-105 |
| 2.5 mm (3/32 in) | AC | 60-115 |
| 3.2 mm (1/8 in) | DC± | 75-135 |
| 3.2 mm (1/8 in) | AC | 80-150 |
| 4.0 mm (5/32 in) | DC± | 120-170 |
| 4.0 mm (5/32 in) | AC | 120-185 |
| Diameter | Polarity⁽¹⁾ |
Current
Amps |
|---|---|---|
| 2.5 mm (3/32 in) | DC± | 55-105 |
| 2.5 mm (3/32 in) | AC | 60-115 |
| 3.2 mm (1/8 in) | DC± | 75-135 |
| 3.2 mm (1/8 in) | AC | 80-150 |
| 4.0 mm (5/32 in) | DC± | 120-170 |
| 4.0 mm (5/32 in) | AC | 120-185 |
NOTES
| Note |
|---|
| ⁽¹⁾ Preferred polarity is listed first. |
| DC- for root pass on pipe; DC± for general welding |