Çaplar / Paketleme
|
Çaplar |
10 lb (4.5 kg) Plastic Tube |
|---|---|
| 3/32 in (2.4 mm) | TG718093638 |
DETAYLAR
Techalloy® offers a wide variety of nickel alloy grades of MIG, TIG, and SAW welding products lot tested with certificates of actual wire chemistry and typical mechanical results available online
Özellikleri
- This alloy can be age hardened to higher strengths
- Used for welding alloys 718, 706 and X-750
- Mainly used for welding high strength aircraft components and liquid rocket components involving cryogenic temperatures
- Q2 Lot® - Certificate showing actual wire composition available online
Tipik Uygulamalar
- LPG & LNG storage vessels
- Maintenance and Repair Welding
- General Fabrication
Kaynaklama Konumları
- All
Koruyucu gaz
- 100% Argon
Servis Bilgileri
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Arama sayfası
Test sonucunu görün sorumluluk reddi
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.14 | ERNiFeCr-2 |
| CWB | AWS A5.14 | ERNiFeCr-2 |
WIRE COMPOSITION
| Classification | %Al | %B | %C | %Cr | %Cu | %Fe | %Mn | %Mo | %P | %S | %Si | %Ti | %Nb+Ta | %Ni+Co |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ERNiFeCr-2 Requirement | 0.20 - 0.80 | 0.006 max. | 0.08 max. | 17.0 - 21.0 | 0.30 max. | Remainder | 0.35 max. | 2.80 - 3.30 | 0.015 max. | 0.015 max. | 0.35 max. | 0.65 - 1.15 | 4.75 - 5.50 | 50.0 - 55.0 |
| Typical Result | 0.48-0.50 | 0.003-0.005 | 0.05-0.06 | 17.0-17.5 | 0.02 max. | 19.9-20 | 0.06-0.11 | 2.98-3.04 | 0.001-0.003 | 0.003 max. | 0.04-0.06 | 0.93-0.97 | 5.11-5.45 | 52.5 |