Menü Schließen
Special Alloys Stick Electrodes Packaging

Durchmesser / Lieferform

Durchmesser
 CAN 12.3 KG (3 x 4.1 KG, ca. 351 stk.)
 CAN 12.9 KG (3 x 4.3 KG, ca. 615 stk.)
 CAN 16.2 KG (3 x 5.4 KG, ca. 240 stk.)
2.5 x 350 mm CH9B9-25-1
3.2x350 mm CH9B9-32-1
4.0x450 mm CH9B9-40-1

CHROMET® 9-B9

E-Hand-Schweißen (SMAW/MMA) | CH9B9-25-1

KLASSIFIZIERUNGEN::
AWS A5.5M : E9015-B91 H4
BS EN ISO 3580-B : E 6216-9C1MV

Stabelektrode CHROMET® 9-B9 - 2.5x350 mm - CAN 12.9 KG (ca. 615 stk.)

Durchmesser

Durchmesser wählen

  • 2.5 x 350 mm
  • 3.2x350 mm
  • 4.0x450 mm

Lieferform

Lieferform auswählen

  • CAN 12.9 KG (3 x 4.3 KG, ca. 615 stk.)

DETAILS

Verbesserte Langzeit-Kriechfestigkeitseigenschaften Zum Schweißen entsprechender (P91) 9CrMo-Stähle

Eigenschaften

  • B9 (P91) alloyed steel: Modified 9CrMo designed to weld equivalent "type 91" 9CrMo steels modified with small additions of niobium, vanadium and nitrogen for improved long term creep resistance
  • Moisture resistant coating provides low amounts of weld metal hydrogen levels for a superior weld
  • Specifically designed for high integrity structural service at elevated temperature
  • Weld metal chemistry is low in impurity elements allowing it to respect the X Factor (<15ppm) and J-factor (<120ppm)

Service Informationen

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS-Suchseite

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.5 E9015-B91 H4
ISO ISO 3580-B E 6216-9C1MV

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
%
E9015-B91 H4 Requirement 530 (77) min. 620 (90) min. 17 min.
E 6216-9C1MV Requirement 530 (77) min. 620 (90) min. 15 min.
Typical Result, Stress relieved 590 (86) 710 (103) 22

DEPOSIT COMPOSITION

Classification %Al %C %Cr %Mn %Mo %N %Nb %Ni %P %S %Si %Total Cu %V %Mn+Ni
E9015-B91 H4 Requirement 0.04 max. 0.08 - 0.13 8.0 - 10.5 1.20 max. 0.85 - 1.20 0.02 - 0.07 0.02 - 0.10 0.80 max. 0.01 max. 0.01 max. 0.30 max. 0.25 max. 0.15 - 0.30 1.40 max.
E 6216-9C1MV Requirement 0.04 max. 0.08 - 0.13 8.0 - 10.0 1.25 max. 0.85 - 1.20 0.02 - 0.07 0.02 - 0.10 1.0 max. 0.01 max. 0.01 max. 0.30 max. 0.25 max. 0.15 - 0.3 1.50 max.
Typical Result 0.01 0.10 9.0 0.55 1.00 0.05 0.04 0.30 0.01 0.01 0.25 0.05 0.20 0.85

TYPICAL OPERATING PROCEDURES

Diameter Current
Amps
2.5 mm (3/32") 70-110
3.2 mm (1/8") 80-140
4.0 mm (5/32") 100-180
5.0 mm 140-240