Menü Schließen
Image not found

Durchmesser / Lieferform

Durchmesser
 0.45 KG SPULE
 4.5 KG SPOOL
 6.4 KG COIL
 11.3 KG SPOOL
 22.7 KG COIL
0.9 mm B10283-1 ED016354 ED030637
1.1 mm ED016363 ED030638
1.7 mm ED012506 ED030641
2.0 mm ED012508 ED012509

INNERSHIELD NR-211MP

Schweißen mit selbstschützenden Fülldrähten (FCAW-S) | B10283-1

KLASSIFIZIERUNGEN::
A5.20/A5.36 : E71T-11

Fülldrahtelektrode, selbstschützend Innershield® NR-211MP - 0.9MM - 0.45KG

Durchmesser

Durchmesser wählen

  • 0.9 mm
  • 1.1 mm
  • 1.7 mm
  • 2.0 mm

Lieferform

Lieferform auswählen

  • 0.45 KG SPULE
  • 4.5 KG SPOOL
  • 11.3 KG SPOOL

DETAILS

Vielseitige einsetzbar auf verschiedenen Grundwerkstoffen. Hohe Anwenderfreundlichkeit und gutes Nahtbild. Einfache Schlackenentfernung, Das schnell erstarrende Schweißbad kann nicht ideale Nahtvorbereitungen kompensieren.

Eigenschaften

  • Vielseitige Schweißmöglichkeiten auf verschiedenen Grundwerkstoffen
  • Hohe Bedienerfreundlichkeit und gutes Nahtbild
  • Gute Schlackenentfernbarkeit
  • Schnell erstarrend, tolerant gegenüber ungenauer Nahtvorbereitung

Service Informationen

Dokumentation

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS-Suchseite

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.20 E71T-11
ABS AWS A5.20 E71T-11
CWB CSA W48 E491T-11-AZ-CS3-H16 (E491T-11-H16)
DB ISO 17632-A T 42 Z Z NO 1 H10

MECHANICAL PROPERTIES

Classification Polarity Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
%
E71T-11 Requirement DC- 400 (58) min. 480-660 (70-95) 20 min.
Typical Result, As-welded DC- 420 (61) 570-640 (82-92) 22

DEPOSIT COMPOSITION

Classification Polarity %Al %C %Mn %P %S %Si
E71T-11 Requirement DC- 0.30 max. 1.75 max. 0.03 max. 0.03 max. 0.60 max.
Typical Result DC- 1.2-1.6 0.15-0.28 0.53-0.79 0.012 0.004 0.13-0.28

TYPICAL OPERATING PROCEDURES

Diameter Polarity CTWD
mm (in.) 		Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps 		Melt-off Rate
kg/hr (lb/hr) 		Deposition Rate
kg/hr (lb/hr) 		Efficiency
%
0.030 in (0.8 mm) DC- 13 (1/2) 1.3 (50) 13-14 30 0.2 (0.5) 0.2 (0.4) 81
0.030 in (0.8 mm) DC- 13 (1/2) 2.5 (100) 13-14 60 0.5 (1.1) 0.4 (0.8) 75
0.030 in (0.8 mm) DC- 13 (1/2) 3.8 (150) 14-15 80 0.7 (1.6) 0.6 (1.2) 78
0.030 in (0.8 mm) DC- 13 (1/2) 5.1 (200) 14-15 100 1.0 (2.1) 0.8 (1.7) 81
0.030 in (0.8 mm) DC- 13 (1/2) 6.4 (250) 15-16 130 1.2 (2.6) 1.0 (2.1) 80
0.030 in (0.8 mm) DC- 13 (1/2) 7.6 (300) 18-19 140 1.4 (3.2) 1.2 (2.6) 81
0.035 in (0.9 mm) DC- 13-16 (1/2-5/8) 1.3 (50) 14-15 30 0.4 (0.8) 0.3 (0.7) 81
0.035 in (0.9 mm) DC- 13-16 (1/2-5/8) 1.8 (70) 15-16 60 0.5 (1.2) 0.5 (1.0) 83
0.035 in (0.9 mm) DC- 13-16 (1/2-5/8) 2.8 (110) 16-17 115 0.7 (1.6) 0.6 (1.3) 78
0.035 in (0.9 mm) DC- 13-16 (1/2-5/8) 3.8 (150) 17-18 130 1.0 (2.2) 0.8 (1.7) 78
0.035 in (0.9 mm) DC- 13-16 (1/2-5/8) 5.1 (200) 18-19 155 1.4 (3.0) 1.1 (2.5) 84
0.035 in (0.9 mm) DC- 13-16 (1/2-5/8) 7.0 (275) 20-21 155 2.0 (4.4) 1.5 (3.4) 78
.045" (1.1 mm) DC- 13 (1/2) 1.8 (70) 15-16 120 0.7 (1.6) 0.5 (1.1) 69
.045" (1.1 mm) DC- 13 (1/2) 2.3 (90) 16-17 140 1.0 (2.2) 0.8 (1.7) 77
.045" (1.1 mm) DC- 13 (1/2) 2.8 (110) 17-18 160 1.2 (2.7) 1.0 (2.3) 85
.045" (1.1 mm) DC- 13 (1/2) 3.3 (130) 18-19 170 1.5 (3.2) 1.2 (2.7) 84
0.068 in (1.7 mm) DC- 19-32 (3/4-1 1/4) 1.0 (40) 15-16 125 1.0 (2.1) 0.8 (1.7) 81
0.068 in (1.7 mm) DC- 19-32 (3/4-1 1/4) 1.9 (75) 18-19 190 1.8 (4.0) 1.5 (3.4) 85
0.068 in (1.7 mm) DC- 19-32 (3/4-1 1/4) 3.3 (130) 20-21 270 3.2 (7.0) 2.8 (6.1) 88
0.068 in (1.7 mm) DC- 19-32 (3/4-1 1/4) 4.4 (175) 23-24 300 4.3 (9.4) 3.8 (8.4) 89
5/64 in (2.0 mm) DC- 19-32 (3/4-1 1/4) 1.3 (50) 16-17 180 1.6 (3.5) 1.3 (2.9) 83
5/64 in (2.0 mm) DC- 19-32 (3/4-1 1/4) 1.9 (75) 18-19 235 2.4 (5.3) 2.0 (4.5) 85
5/64 in (2.0 mm) DC- 19-32 (3/4-1 1/4) 3.0 (120) 20-21 290 3.8 (8.4) 3.4 (7.4) 88
5/64 in (2.0 mm) DC- 19-32 (3/4-1 1/4) 4.1 (160) 22-23 325 5.1 (11.2) 4.5 (10.0) 89
3/32 in (2.4 mm) DC- 19-32 (3/4-1 1/4) 1.3 (50) 16-17 245 2.3 (5.0) 1.9 (4.2) 84
3/32 in (2.4 mm) DC- 19-32 (3/4-1 1/4) 1.9 (75) 19-20 305 3.4 (7.5) 2.9 (6.4) 85
3/32 in (2.4 mm) DC- 19-32 (3/4-1 1/4) 2.5 (100) 20-21 365 4.5 (10.0) 3.9 (8.7) 87
3/32 in (2.4 mm) DC- 19-32 (3/4-1 1/4) 3.3 (130) 22-23 400 5.9 (12.9) 5.1 (11.3) 88