Durchmesser / Lieferform
|
Durchmesser |
6.4 KG COIL |
|---|---|
| 2,0 mm | ED033827 |
DETAILS
A mild steel self-shielded flux-cored wire designed to provide low temperature impact toughness in a variety of offshore applications.
Eigenschaften
- Besonders geeignet für Offshore-Anwendungen - optimale Schweißeigenschaften in engen TKY-Fugen und bei ungenauer Nahtvorbereitung
- Ausgezeichnete Nahtübergänge - hohe Schweißgeschwindigkeiten und flache Nahtoberfläche beim Steig- und Fallnahtschweißen
- Gute Kerbschlagzähigkeit bei niedrigen Temperaturen , erfüllt ABS 4YSA und AWS J Klassifizierung
- Niedriger Gehalt an diffusiblem Wasserstoff (H8)
- ProTech® Verpackung – hermetisch geschlossene Vakuumverpackung (Schutz vor Feuchtigkeit)
- Q2 Lot - Zeugnis mit chemischer Analyse und mechanischen Gütewerten der Charge online verfügbar.
Service Informationen
Dokumentation
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS-Suchseite
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.29 | E71T8-Ni2-JH8 |
| AWS | AWS A5.36 | E71T8-A4-Ni2-H8 |
| ABS | ABS - Part 2 | 4YSA H5 |
| DNV-GL | DNV - 2.9 | IV YMS H5 |
| LR | LR - Chapter 11 | 4YS H5 |
MECHANICAL PROPERTIES
| Classification | Polarity |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Charpy V-Notch
J (ft-lbs) @ -40°C (-40°F) |
|---|---|---|---|---|---|
| E71T8-Ni2-JH8 Requirement | DC- | 400 (58) min. | 480-620 (70-90) | 20 min. | 27 (20) min. |
| E71T8-A4-Ni2-H8 Requirement | DC- | 400 (58) min. | 480-660 (70-95) | 22 min. | 27 (20) min. |
| Typical Result, As-welded | DC- | 410 (60) | 500-570 (72-83) | 23 | 42-446 (31-329) |
DEPOSIT COMPOSITION
| Classification | Polarity | %Al | %C | %Mn | %Ni | %P | %S | %Si |
Diffusible Hydrogen
mL/100g Weld Metal |
|---|---|---|---|---|---|---|---|---|---|
| E71T8-Ni2-JH8 Requirement | DC- | 1.8 max. | 0.12 max. | 1.50 max. | 1.75 - 2.75 | 0.030 max. | 0.030 max. | 0.80 max. | 8.0 max. |
| E71T8-A4-Ni2-H8 Requirement | DC- | 1.8 max. | 0.12 max. | 1.50 max. | 1.75 - 2.75 | 0.030 max. | 0.030 max. | 0.80 max. | 8 max. |
| Typical Result | DC- | 0.8-1.1 | 0.01-0.03 | 0.70-1.13 | 1.78-2.11 | 0.016 | 0.004 | 0.13-0.18 | 1.6-6.9 |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity |
CTWD
mm (in.) |
Wire Feed Speed
m/min (in/min) |
Voltage
volts |
Approx. Current
amps |
Melt-off Rate
kg/hr (lb/hr) |
Deposition Rate
kg/hr (lb/hr) |
Efficiency
% |
|---|---|---|---|---|---|---|---|---|
| 1.6 mm (1/16 in) | DC- | 22 (7/8) | 2.3 (90) | 17-18 | 160 | 1.6 (3.6) | 1.1 (2.5) | 69 |
| 1.6 mm (1/16 in) | DC- | 22 (7/8) | 2.5 (100) | 18-19 | 170 | 1.6 (3.6) | 1.2 (2.8) | 72 |
| 1.6 mm (1/16 in) | DC- | 22 (7/8) | 2.8 (110) | 18-19 | 180 | 2.0 (4.4) | 1.4 (3.1) | 73 |
| 1.6 mm (1/16 in) | DC- | 22 (7/8) | 3.0 (120) | 19-20 | 195 | 2.2 (4.8) | 1.6 (3.5) | 73 |
| 1.6 mm (1/16 in) | DC- | 22 (7/8) | 3.3 (130) | 19-20 | 210 | 2.3 (5.1) | 1.7 (3.7) | 73 |
| 2.0 mm (5/64 in) | DC- | 25 (1) | 1.8 (70) | 16-17 | 205 | 1.9 (4.2) | 1.5 (3.2) | 76 |
| 2.0 mm (5/64 in) | DC- | 25 (1) | 2.0 (80) | 17-18 | 225 | 2.2 (4.7) | 1.6 (3.6) | 77 |
| 2.0 mm (5/64 in) | DC- | 25 (1) | 2.3 (90) | 18-19 | 240 | 2.4 (5.3) | 1.9 (4.2) | 78 |
| 2.0 mm (5/64 in) | DC- | 25 (1) | 2.5 (100) | 19-20 | 260 | 2.7 (5.9) | 2.1 (4.7) | 79 |
| 2.0 mm (5/64 in) | DC- | 25 (1) | 2.8 (110) | 20-21 | 260 | 3.0 (6.5) | 2.4 (5.2) | 80 |
| 2.0 mm (5/64 in) | DC- | 25 (1) | 3.0 (120) | 20-21 | 295 | 3.2 (7.1) | 2.5 (5.6) | 79 |