Menü Schließen
Lincoln Electric MIG Wire

Durchmesser / Lieferform

Durchmesser
 15 KG SPOOL
1,0 mm ED033119

Pipeliner ® 80Ni1

MIG/MAG Schweißen (GMAW) | ED033119

KLASSIFIZIERUNGEN::
ER80S-G

Pipeliner® 80Ni1 from Lincoln Electric is a micro-alloyed MIG wire designed for semi-automatic or automatic welding of root, hot, fill and cap passes.

Durchmesser

Durchmesser wählen

  • 1,0 mm

Lieferform

Lieferform auswählen

  • 15 KG SPOOL

DETAILS

This micro-alloyed MIG wire is designed for semi-automatic or automatic welding of root, hot, fill and cap passes on up to X80 grade pipe and root passes on up to X100 grade pipe.

Eigenschaften

  • Wurzellage bis X100 sowie Hot Pass, Füll- und Decklage bis X80 Rohre
  • Kerbschlagzähigkeit 69-95J bei-50°C
  • Q2 Lot® - Zeugnis mit chemischer Analyse der Charge online verfügbar
  • Idealer Drahtaustritt für Engspaltvorbereitungen
  • ProTech® Verpackungssystem

Service Informationen

Dokumentation

Ergänzende Produkte

50 lb Can of Lincoln Electric Stick Electrodes

Pipeliner® 8P+

ED030826
Drive Roll and Guide Tube Kit

Antriebsrollen Satz (2R) 1.1 mm

KP1696-045S
Magnum Pro 250L Gun

Magnum® PRO Nozzle - 350A, Thread-on, Recess, 5/8 in (15.9 mm) ID

KP2742-1-62R
Magnum Pro Tapered Contact tip

Copper Plus® Contact Tip - 350A, Standard, .045 in (1.2 mm) - 10/pack

KP2744-045
Alle anzeigen

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS-Suchseite

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.28 ER80S-G
ABS ABS - Part 2 5YQ500SA H10
CWB AWS A5.28 ER80S-G
DNV-GL DNV - 2.9 V Y50MS H5
LR LR - Chapter 11 5Y50S H5

MECHANICAL PROPERTIES

Classification Shielding Gas Polarity Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) 		Charpy V-Notch
J (ft-lbs) @ -60°C (-75°F) 		Hardness Rockwell B
ER80S-G Requirement Not Specified DC+ 550 (80) min. Info. Only
Typical Result, As-welded 80% Ar, 20% CO2 DC+ 510-600 (74-87) 620-670 (90-97) 25-27 92-142 (68-105) 68-100 (50-74) 91-95

DEPOSIT COMPOSITION

Classification Shielding Gas Polarity %C %Cr %Cu %Mn %Mo %Ni %P %S %Si %Ti %V %Zr
Typical Result 80% Ar, 20% CO2 DC+ 0.06-0.09 0.03-0.05 0.16-0.20 1.27-1.32 0.02 max. 0.75-0.87 0.005-0.009 0.005-0.009 0.56-0.65 0.03 0.005 max. 0.001 max.

WIRE COMPOSITION

Classification %Al %C %Cr %Mn %Mo %Ni %P %S %Si %Ti %V %Zr %Ti+Zr %Total Cu
ER80S-G Requirement 0.30 min. * 0.20 min. * 0.50 min. *
Typical Result 0.01 max. 0.06-0.08 0.04 1.46-1.57 0.01 max. 0.84-0.92 0.005-0.010 0.005-0.011 0.74-0.77 0.07 0.01 max. 0.001 max. 0.04-0.06 0.19-0.21

NOTES

Note
* To meet the requirements of a "G" classification, the chemical composition of the eletrode must meet the minimum requirement for one or more of