Durchmesser / Lieferform
|
Durchmesser |
50 lb Easy Open Can |
|---|---|
| 4,0 x 350 mm (5/32 x 14 in) | ED012896 |
DETAILS
Low alloy stick electrodefFor welding 0.50% molybdenum steel
Eigenschaften
- Deep penetration and superior puddle control
- Light slag for minimal arc interference
- Clean, visible weld puddle
- API 5L X42 through X56 grade pipe
- Cross country and in-plant pipe
Service Informationen
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS-Suchseite
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.5 | E7010-A1 |
| ISO | ISO 2560-B | E4910-G P |
| ABS | AWS A5.5 | E7010-A1 |
| CWB | CSA W48 | E4910-A1 |
MECHANICAL PROPERTIES
| Classification |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Hardness Rockwell B |
|---|---|---|---|---|
| E7010-A1 Requirement | 390 (57) min. | 480 (70) min. | 22 min. | |
| Typical Result, 1 hour @ 620°C (1150°F) | 440-520 (64-75) | 530-630 (77-91) | 22-28 | 84-93 |
DEPOSIT COMPOSITION
| Classification | %C | %Mn | %Mo | %P | %S | %Si |
|---|---|---|---|---|---|---|
| E7010-A1 Requirement | 0.12 max. | 0.60 max. | 0.40 - 0.65 | 0.03 max. | 0.03 max. | 0.40 max. |
| Typical Result | 0.07-0.12 | 0.40-0.58 | 0.53-0.57 | 0.01 max. | 0.01 max. | 0.13-0.26 |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity |
Current
Amps |
|---|---|---|
| 3/32 in (2.4 mm) | DC+ | 50-90 |
| 1/8 in (3.2 mm) | DC+ | 75-130 |
| 5/32 in (4.0 mm) | DC+ | 90-175 |
| 3/16 in (4.8 mm) | DC+ | 140-225 |