Menu Close
500 lb Accu-Trak Drum, 600 lb Accu- Trak Drum, 1000 Accu-Pak Drum

Diameters / Packaging

Diameters
 600 lb (272 kg) Speed-Feed® Drum
5/32 in (4.0 mm) ED018576

Lincore® 96-S Metal-Cored Submerged Arc (SAW) Wire

Metal-Cored Submerged Arc (SAW) | ED018576

LINCORE® 96-S Metal-Cored Submerged Arc Wire ideal use where a higher hardness is required which produces a high carbon, 420 stainless steel deposit and typical application on Caster rolls (Roll Rebuilding, Metal-to-Metal)

Diameter

Select Diameter

  • 5/32 in (4.0 mm)

Package

Select Package

  • 600 lb (272 kg) Speed-Feed® Drum

DETAILS

LINCORE® 96-S Metal-Cored Submerged Arc Wire can be used on work rolls and backup rolls when water spray causes pitting on tool steel deposits, recommended 801 primary flux and 802 secondary flux. Composition and properties depend upon dilution. Single layer deposit properties depend upon base metal and/or build-up material.

Features

  • Metal-cored wire which produces a high carbon, 420 stainless steel deposit
  • Use where a higher hardness is required
  • Can be used on work rolls and backup rolls when water spray causes pitting on tool steel deposits

Service Information

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

MECHANICAL PROPERTIES

Flux Classification Hardness Rockwell C
Lincolnweld® 801® Typical Result 48-54

DEPOSIT COMPOSITION

Flux Classification %C %Cr %Mn %Si
Lincolnweld® 801® Typical Result 0.23 13.0 1.2 0.4

TYPICAL OPERATING PROCEDURES

Diameter Polarity Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps
3/32 in (2.4 mm) DC+ 1.7 (65) 24 250
3/32 in (2.4 mm) DC+ 2.5 (100) 28 525
3/32 in (2.4 mm) DC+ 4.4 (175) 31 450
1/8 in (3.2 mm) DC+ 1.5 (60) 26 360
1/8 in (3.2 mm) DC+ 2.5 (100) 28 525
1/8 in (3.2 mm) DC+ 3.6 (140) 30 635
5/32 in (4.0 mm) DC+ 1.4 (55) 27 450
5/32 in (4.0 mm) DC+ 2.2 (85) 30 650
5/32 in (4.0 mm) DC+ 2.9 (115) 32 775