DETAILS
Designed for vertical down welding of cross-country and in-plant pipe
Features
- Root pass welding of up to X80 grade pipe
- Hot, fill and cap pass of up to X65 grade pipe
- Vertical down welding
- Meets NACE MR0175 for sour gas applications
- Test data available for SSC (NACE TM0177)
- Cellulosic electrode
Service Information
You May Also Need
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.5 | E7010-G, E7010-P1 |
| ISO | ISO 2560-A | E 46 3 1Ni C 2 1 |
| ABS | AWS A5.5 | E7010-P1 |
| TUV | AWS A5.5 | E7010-P1 |
MECHANICAL PROPERTIES
| Classification |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) |
Charpy V-Notch
J (ft-lbs) @ -40°C (-40°F) |
Hardness Rockwell B |
|---|---|---|---|---|---|---|
| E7010-P1 Requirement | 410 (60) min. | 480 (70) min. | 22 min. | 27 (20) min. | ||
| Typical Result, As-welded | 460-540 (67-79) | 560-660 (81-95) | 22-32 | 54-110 (40-81) | 37-103 (27-76) | 81-91 |
DEPOSIT COMPOSITION
| Classification | %B | %C | %Cr | %Mn | %Mo | %Nb | %Ni | %P | %S | %Si | %V |
|---|---|---|---|---|---|---|---|---|---|---|---|
| E7010-P1 Requirement | 0.20 max. | 0.30 max. | 1.20 max. | 0.50 max. | 1.00 max. | 0.03 max. | 0.03 max. | 0.60 max. | 0.10 max. | ||
| Typical Result | 0.002 | 0.11-0.18 | 0.04 max. | 0.50-0.88 | 0.07-0.20 | 0.010 max. | 0.66-0.97 | 0.01 | 0.01 max. | 0.10-0.40 | 0.01 |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity |
Current
Amps |
|---|---|---|
| 3.2 mm (1/8 in) | DC+ | 65-130 |
| 4.0 mm (5/32 in) | DC+ | 100-165 |
| 5.0 mm (3/16 in) | DC+ | 130-210 |