Menu Close
Innershield Flux Cored wire, 25 or 30 lb steel spool

Diameters / Packaging

Diameters
 25 lb Spool
 50 lb Coil
3/32 in (2.4 mm) ED017822
5/64 in (2.0 mm) ED030650
7/64 in (2.8 mm) ED017824

Innershield® NR®-311 Ni Flux-Cored (FCAW-S) Wire

Flux-Cored Self-Shielded (FCAW-S) | ED030650

AWS:
E70T7-K2-H16
E80TG-K2-H16
E70T7-A2-K2-H16
E80TG-A2-K2-H16

Innershield® NR®-311 Ni from Lincoln Electric is designed to provide a nominal 1.5% nickel weld deposit with high deposition rates and fast travel.

Diameter

Select Diameter

  • 3/32 in (2.4 mm)
  • 5/64 in (2.0 mm)
  • 7/64 in (2.8 mm)

Package

Select Package

  • 25 lb Spool
Buy Now

DETAILS

Designed to provide a nominal 1.5% nickel weld deposit with high deposition rates and fast travel. Recommended for flat and horizontal positions in single and multiple pass welding.

Features

  • Designed to provide a nominal 1.5% nickel weld deposit
  • High deposition rates and fast travel speeds
  • Capable of producing weld deposits with impact properties exceeding 27 J (20 ft·
  • lbf) at -29°
  • C (-20°
  • F)
  • Color match on weathering steel applications
  • 3/32 in (2.4 mm) diameter meets FEMA 353 and AWS D1.8 seismic lot waiver requirements
  • FEMA 353 and AWS D1.8 structural steel seismic supplement test data can be found at the Lincoln Electric Certificate Center.

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Service Information

Documentation

You May Also Need

K126 Classic 350A FCAW-SS

K126® Classic® Innershield® 350A FCAW-SS Welding Gun 15 ft 062-332

K126-2
Innershield/Outershield/Submerged Arc Wire

Innershield® NR®-305 Flux-Cored (FCAW-S) Wire

ED012593
500 lb Accu-Trak Drum, 600 lb Accu- Trak Drum, 1000 Accu-Pak Drum

Innershield® NR® -311

ED012628
Innershield/Outershield/Submerged Arc Wire

Innershield® NR®-311 Ni Flux-Cored (FCAW-S) Wire

ED017822
View All

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.29 E70T7-K2-H16, E80TG-K2-H16
AWS AWS A5.36 E70T7-A2-K2-H16, E80TG-A2-K2-H16
ABS ABS - Part 2 2YSA
BV BV - Chapter 5 SA2YM
DNV-GL DNV - 2.9 II YMS
DB ISO 17632-A T 42 2 1, 5Ni W N 5
LR LR - Chapter 11 2YS

MECHANICAL PROPERTIES

Classification Polarity Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F)
E70T7-K2-H16 Requirement DC- 400 (58) min. 480-620 (70-90) 20 min. 27 (20) min.
E70T7-A2-K2-H16 Requirement DC- 400 (58) min. 480-660 (70-95) 22 min. 27 (20) min.
Typical Result, As-welded DC- 470 (68) 580-620 (84-90) 25 27-108 (20-80)

DEPOSIT COMPOSITION

Classification Polarity %Al %C %Cr %Mn %Mo %Ni %P %S %Si %V Diffusible Hydrogen
mL/100g Weld Metal
E70T7-K2-H16 Requirement DC- 1.8 max. 0.15 max. 0.15 max. 0.50 - 1.75 0.35 max. 1.00 - 2.00 0.030 max. 0.030 max. 0.80 max. 0.05 max. 16.0 max.
E70T7-A2-K2-H16 Requirement DC- 1.8 max. 0.15 max. 0.15 max. 0.50 - 1.75 0.35 max. 1.00 - 2.00 0.030 max. 0.030 max. 0.80 max. 0.05 max. 16 max.
Typical Result DC- 1.0-1.4 0.06-0.08 0.05 1.27-1.48 0.05 1.30-1.55 0.010 0.003 0.20-0.24 0.010 8.0

TYPICAL OPERATING PROCEDURES

Diameter Polarity CTWD
mm (in.) 		Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps 		Melt-off Rate
kg/hr (lb/hr) 		Deposition Rate
kg/hr (lb/hr) 		Efficiency
%
5/64 in (2.0 mm) DC- 32 (1 1/4) 2.5 (100) 21-23 170 2.5 (5.5) 1.8 (3.9) 70
5/64 in (2.0 mm) DC- 32 (1 1/4) 3.3 (130) 24-26 205 3.3 (7.2) 2.4 (5.2) 72
5/64 in (2.0 mm) DC- 32 (1 1/4) 4.1 (160) 25-27 235 4.0 (8.8) 2.9 (6.5) 73
5/64 in (2.0 mm) DC- 32 (1 1/4) 5.1 (200) 26-28 270 5.0 (11.0) 3.8 (8.3) 75
5/64 in (2.0 mm) DC- 32 (1 1/4) 6.1 (240) 27-29 295 6.1 (13.3) 4.5 (10.0) 75
3/32 in (2.4 mm) DC- 38 (1 1/2) 1.9 (75) 20-22 200 2.8 (6.2) 1.9 (4.2) 67
3/32 in (2.4 mm) DC- 38 (1 1/2) 2.5 (100) 21-23 245 3.8 (8.3) 2.7 (5.9) 71
3/32 in (2.4 mm) DC- 38 (1 1/2) 3.1 (125) 23-25 285 4.7 (10.4) 3.4 (7.5) 72
3/32 in (2.4 mm) DC- 38 (1 1/2) 3.8 (150) 25-27 330 5.7 (12.5) 4.1 (9.1) 72
3/32 in (2.4 mm) DC- 38 (1 1/2) 4.4 (175) 26-28 365 6.6 (14.5) 4.9 (10.8) 74
3/32 in (2.4 mm) DC- 38 (1 1/2) 5.1 (200) 27-29 390 7.6 (16.6) 5.6 (12.3) 74
7/64 in (2.8 mm) DC- 44.5 (1 3/4) 2.5 (100) 22-24 310 5.2 (11.4) 3.8 (8.4) 73
7/64 in (2.8 mm) DC- 44.5 (1 3/4) 3.5 (140) 24-26 370 7.2 (15.8) 5.4 (11.8) 74
7/64 in (2.8 mm) DC- 44.5 (1 3/4) 4.3 (170) 26-28 430 8.9 (19.5) 6.6 (14.5) 74
7/64 in (2.8 mm) DC- 44.5 (1 3/4) 5.1 (200) 28-30 470 10.4 (22.8) 7.7 (17.0) 74
7/64 in (2.8 mm) DC- 44.5 (1 3/4) 6.1 (240) 29-31 520 12.4 (27.2) 9.2 (20.4) 75