DETAILS
- A low carbon, low manganese, low silicon general purpose electrode
- Provides the lowest hardness and is best suited for use with the Lincolnweld® 700 series of active fluxes
Features
- A nickel-bearing wire with 0.2% molybdenum designed for use on weathering steels
- Capable of producing weld deposits with 480-550 MPa (70-80 ksi) tensile strength in the as-welded and stress-relieved conditions
- Actual (Type 3.1) certificates for each lot of wire showing chemical composition are available in the certificate center of lincolnelectric.com
Disclaimers
Service Information
You May Also Need
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.17 | EL12 |
| AWS | AWS A5.23 | EL12 |
| ISO | ISO 14171-A | S1 |
| DB | ISO 14171-S | S1 |
| MIL | MIL-E-23765/4 | MIL-EL12 |
WIRE COMPOSITION
| Classification | %C | %Mn | %P | %S | %Si | %Total Cu |
|---|---|---|---|---|---|---|
| EL12 Requirement | 0.04 - 0.14 | 0.25 - 0.60 | 0.030 max. | 0.030 max. | 0.10 max. | 0.35 max. |
| S1 Requirement | 0.05 - 0.15 | 0.35 - 0.60 | 0.025 max. | 0.025 max. | 0.15 max. | |
| Typical Result | 0.11 | 0.48 | 0.005 | 0.009 | 0.07 | 0.12 |