Menu Close
Stem package of Lincolnweld submerged arc wire

Diameters / Packaging

Diameters
 60 lb Coil
 60 LB COIL
 1000 LB DRUM
 1000 lb Speed Feed® Drum
 2200 lb Speed Feed® Stem
1/8 ED500923 ED500928
1/8 in (3.2 mm) ED012051 ED021192 ED032971
3/16 in (4.8 mm) ED012052
5/32 in (4.0 mm) ED012053 ED021193 ED032970
5/64 in (2.0 mm) ED012054

Lincolnweld® L-70 Submerged Arc (SAW) Wire

Submerged Arc Welding (SAW) | ED032971

AWS:
EA1

Low Alloy Solid Electrode

Diameter

Select Diameter

  • 1/8
  • 1/8 in (3.2 mm)
  • 3/16 in (4.8 mm)
  • 5/32 in (4.0 mm)
  • 5/64 in (2.0 mm)

Package

Select Package

  • 60 lb Coil
  • 1000 lb Speed Feed® Drum
  • 2200 lb Speed Feed® Stem
Buy Now

DETAILS

  • A low carbon, medium manganese, low silicon, 1/2% molybdenum wire used for single or multiple pass welds
  • A standard choice for pipe fabrication and other limited pass applications

Features

  • A low carbon, medium manganese, low silicon, 1/2% molybdenum wire used for single or multiple pass welds
  • A standard choice for pipe fabrication and other limited pass applications
  • Actual (Type 3.1) certificates for each lot of wire showing chemical composition are available in the certificate center of lincolnelectric.com

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Service Information

Documentation

You May Also Need

NA-5 Control

NA-5 Control

K356-2
NA-4 Control Box

NA-4 Controller

K388-2
LT-7 Tractor

LT-7 Tractor (Track Model)

K395-1
500 lb Accu-Trak Drum, 600 lb Accu- Trak Drum, 1000 Accu-Pak Drum

Lincolnweld® L-70 Submerged Arc (SAW) Wire

ED021192
View All

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.23 EA1
ISO ISO 14171-A S2Mo
DB ISO 14171-S S2Mo
MIL MIL-E-23765/4 MIL-EA1

WIRE COMPOSITION

Classification %C %Mn %Mo %P %S %Si %Total Cu
EA1 Requirement 0.05 - 0.15 0.65 - 1.00 0.45 - 0.65 0.025 max. 0.025 max. 0.20 max. 0.35 max.
S2Mo Requirement 0.07 - 0.15 0.80 - 1.30 0.45 - 0.65 0.025 max. 0.025 max. 0.05 - 0.25
Typical Result 0.10 0.87 0.53 0.004 0.013 0.10 0.08