Menu Close
50 lb Can of Lincoln Electric Stick Electrodes

Diameters / Packaging

Diameters
 (3) 10 lb Easy Open Can
 50 lb Easy Open Can
3.2 x 350 mm (1/8 x 14 in) ED032612
3.2 x 355 mm (1/8 x 14 in) ED031611
4.0 x 350 mm (5/32 x 14 in) ED032613
4.0 x 355 mm (5/32 x 14 in) ED031612
5.0 x 350 mm (3/16 x 14 in) ED032614
5.0 x 355 mm (3/16 x 14 in) ED031613

Pipeliner® 7P+

Stick (SMAW) | ED031613

AWS:
E7010-P1
also meets E7010-G

Low Alloy, Cellulosic, Pipe • AWS E7010-P1

Diameter

Select Diameter

  • 3.2 x 350 mm (1/8 x 14 in)
  • 3.2 x 355 mm (1/8 x 14 in)
  • 4.0 x 350 mm (5/32 x 14 in)
  • 4.0 x 355 mm (5/32 x 14 in)
  • 5.0 x 350 mm (3/16 x 14 in)
  • 5.0 x 355 mm (3/16 x 14 in)

Package

Select Package

  • 50 lb Easy Open Can
Buy Now

DETAILS

Designed for vertical down welding of cross-country and in-plant pipe

Features

  • Q2 Lot® - Lot Controlled Chemistry and Mechanical Properties
  • High productivity in vertical down and out-of-position pipe welding
  • Deep penetration
  • Clean, visible weld puddle
  • Meets NACE MR0175 for sour gas applications
  • Test data available for SSC (NACE TM0177) & HIC (NACE TM0284)

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Service Information

Documentation

You May Also Need

50 lb Can of Lincoln Electric Stick Electrodes

Shield-Arc HYP+

ED029509
50 lb Can of Lincoln Electric Stick Electrodes

Shield-Arc HYP+

ED029511
50 lb Can of Lincoln Electric Stick Electrodes

Shield-Arc HYP+

ED029513
50 lb Can of Lincoln Electric Stick Electrodes

Pipeliner® 7P+

ED031611
View All

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.5 E7010-G, E7010-P1
ISO ISO 2560-A E 46 3 1Ni C 2 1
ABS AWS A5.5 E7010-P1
TUV AWS A5.5 E7010-P1

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) 		Charpy V-Notch
J (ft-lbs) @ -40°C (-40°F) 		Hardness Rockwell B
E7010-P1 Requirement 410 (60) min. 480 (70) min. 22 min. 27 (20) min.
Typical Result, As-welded 460-540 (67-79) 560-660 (81-95) 22-32 54-110 (40-81) 37-103 (27-76) 81-91

DEPOSIT COMPOSITION

Classification %B %C %Cr %Mn %Mo %Nb %Ni %P %S %Si %V
E7010-P1 Requirement 0.20 max. 0.30 max. 1.20 max. 0.50 max. 1.00 max. 0.03 max. 0.03 max. 0.60 max. 0.10 max.
Typical Result 0.002 0.11-0.18 0.04 max. 0.50-0.88 0.07-0.20 0.010 max. 0.66-0.97 0.01 0.01 max. 0.10-0.40 0.01

TYPICAL OPERATING PROCEDURES

Diameter Polarity Current
Amps
3.2 mm (1/8 in) DC+ 65-130
4.0 mm (5/32 in) DC+ 100-165
5.0 mm (3/16 in) DC+ 130-210