Diameters / Packaging
|
Diameters |
33 lb Spool |
33 lb Spool Buy America |
44 lb Spool |
44 LB SPOOL |
44 lb Spool Buy America |
60 lb Spool |
500 lb Accu-Pak® Box |
500 lb Accu-Trak® Drum |
500 LB DRUM |
500 lb Infinity-Pak® |
600 lb Speed Feed® Drum |
900 lb Accu-Pak® Box |
1000 lb Accu-Pak® Box |
1000 lb Accu-Trak® Drum |
1000 LB DRUM |
1000 lb Infinity-Pak |
1000 lb Precise-Trak® Reel |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.030 in (0.8 mm) | ED031407,ED032923 | ED029223 | |||||||||||||||
| 0.035 IN | ED561005 | ED561200 | |||||||||||||||
| 0.035 in (0.9 mm) | ED031408,ED032924 | ED021268,ED031914 | ED036624 | ED021269 | ED032899 | ED021052 | ED032842 | ED028825 | ED032379 | ||||||||
| 0.040 in (1.0 mm) | ED033292 | ||||||||||||||||
| 0.045 IN | ED561011 | ED561201 | ED561224 | ||||||||||||||
| 0.045 in (1.1 mm) | ED031409,ED032925 | ED036879 | ED021270,ED031915 | ED034428 | ED021271 | ED032901 | ED020526 | ED034535 | ED032844 | ED028826 | ED031930 | ED031614 | |||||
| 0.052 IN | ED561202 | ||||||||||||||||
| 0.052 in (1.3 mm) | ED031916 | ED021273 | ED032902 | ED020527 | ED032845 | ED029082 | ED031615 | ||||||||||
| 1/16 in (1.6 mm) | ED027274 | ED032903 | ED011316 | ED032846 | ED029083 | ED033270 |
DETAILS
Our most popular MIG wire, SuperArc® L-50®, premium copper coated wire, is an excellent choice for 50,000 psi (345 MPa) yield strength, carbon steel base materials.
Features
- Moderate levels of manganese and silicon for deoxidization of clean to light mill scale surfaces
- Superior feeding and arc stability
- Copper coated for long contact tip life
- Supports short-circuiting, globular, axial spray and pulsed spray transfer
Disclaimers
Service Information
Documentation
You May Also Need
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.18 | ER70S-3 |
| ABS | ABS - Part 2 | 3YSA H5 |
| CWB | CSA W48 | B-G 49A 3 C1 S3 (B-G 49A 3 C1 G3) |
| DNV-GL | DNV - 2.9 | III YMS H5 |
| LR | LR - Chapter 11 | 3YS H5 |
| MIL | MIL-E-23765/1D | MIL-70S-3 |
| MIL | MIL-E-23765/1E | MIL-70S-3 |
MECHANICAL PROPERTIES
| Classification | Shielding Gas | Polarity |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Charpy V-Notch
J (ft-lbs) @ -20°C (0°F) |
Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) |
|---|---|---|---|---|---|---|---|
| Typical Result, As-welded | 100% CO2 | DC+ | 400 (58) | 500-560 (73-81) | 24 | 95-132 (70-98) | 95-106 (70-78) |
WIRE COMPOSITION
| Classification | %C | %Cr | %Mn | %Mo | %Ni | %P | %S | %Si | %Total Cu | %V |
|---|---|---|---|---|---|---|---|---|---|---|
| ER70S-3 Requirement | 0.06 - 0.15 | 0.15 max. | 0.90 - 1.40 | 0.15 max. | 0.15 max. | 0.025 max. | 0.035 max. | 0.45 - 0.75 | 0.50 max. | 0.03 max. |
| Typical Result | 0.06-0.11 | 0.02-0.04 | 1.15-1.24 | 0.02 max. | 0.01-0.04 | 0.004-0.012 | 0.004-0.011 | 0.44-0.62 | 0.00 max. | 0.12-0.27 |
TYPICAL OPERATING PROCEDURES
| Diameter | Transfer Mode | Shielding Gas | Polarity |
CTWD
mm (in.)⁽¹⁾ |
Wire Feed Speed
m/min (in/min) |
Voltage
volts |
Approx. Current
amps |
Melt-off Rate
kg/hr (lb/hr) |
|---|---|---|---|---|---|---|---|---|
| 0.030 in (0.8 mm) | Short Circuit Transfer | 100% CO2 | DC+ | 9-12 (3/8-1/2) | 1.9 (75) | 17 | 35 | 0.4 (0.9) |
| 0.030 in (0.8 mm) | Short Circuit Transfer | 100% CO2 | DC+ | 9-12 (3/8-1/2) | 3.8 (150) | 18 | 70 | 0.8 (1.8) |
| 0.030 in (0.8 mm) | Short Circuit Transfer | 100% CO2 | DC+ | 9-12 (3/8-1/2) | 7.6 (300) | 22 | 130 | 1.6 (3.6) |
| 0.035 in (0.9 mm) | Short Circuit Transfer ⁽²⁾ | 100% CO2 | DC+ | 9-12 (3/8-1/2) | 2.5 (100) | 18 | 80 | 0.7 (1.6) |
| 0.035 in (0.9 mm) | Short Circuit Transfer ⁽²⁾ | 100% CO2 | DC+ | 9-12 (3/8-1/2) | 3.8 (150) | 19 | 120 | 1.1 (2.4) |
| 0.035 in (0.9 mm) | Short Circuit Transfer ⁽²⁾ | 100% CO2 | DC+ | 9-12 (3/8-1/2) | 6.4 (250) | 22 | 175 | 1.8 (4.0) |
| 0.035 in (0.9 mm) | Spray Transfer | 90% Ar / 10% CO2 | DC+ | 12-19 (1/2-3/4) | 9.5 (375) | 23 | 195 | 2.7 (6.0) |
| 0.035 in (0.9 mm) | Spray Transfer | 90% Ar / 10% CO2 | DC+ | 12-19 (1/2-3/4) | 12.7 (500) | 29 | 230 | 3.6 (8.0) |
| 0.035 in (0.9 mm) | Spray Transfer | 90% Ar / 10% CO2 | DC+ | 12-19 (1/2-3/4) | 15.2 (600) | 30 | 275 | 4.4 (9.6) |
| 0.045 in (1.1 mm) | Short Circuit Transfer ⁽²⁾ | 100% CO2 | DC+ | 12-19 (1/2-3/4) | 3.2 (125) | 19 | 145 | 1.5 (3.4) |
| 0.045 in (1.1 mm) | Short Circuit Transfer ⁽²⁾ | 100% CO2 | DC+ | 12-19 (1/2-3/4) | 3.8 (150) | 20 | 165 | 1.8 (4.0) |
| 0.045 in (1.1 mm) | Short Circuit Transfer ⁽²⁾ | 100% CO2 | DC+ | 12-19 (1/2-3/4) | 5.1 (200) | 21 | 200 | 2.4 (5.4) |
| 0.045 in (1.1 mm) | Spray Transfer | 90% Ar / 10% CO2 | DC+ | 12-19 (1/2-3/4) | 8.9 (350) | 27 | 285 | 4.2 (9.2) |
| 0.045 in (1.1 mm) | Spray Transfer | 90% Ar / 10% CO2 | DC+ | 12-19 (1/2-3/4) | 12.1 (475) | 30 | 335 | 5.7 (12.5) |
| 0.045 in (1.1 mm) | Spray Transfer | 90% Ar / 10% CO2 | DC+ | 12-19 (1/2-3/4) | 12.7 (500) | 30 | 340 | 6.0 (13.2) |
| 0.052 in (1.3 mm) | Spray Transfer | 90% Ar / 10% CO2 | DC+ | 12-19 (1/2-3/4) | 7.6 (300) | 30 | 300 | 4.8 (10.6) |
| 0.052 in (1.3 mm) | Spray Transfer | 90% Ar / 10% CO2 | DC+ | 12-19 (1/2-3/4) | 8.1 (320) | 30 | 320 | 5.2 (11.5) |
| 0.052 in (1.3 mm) | Spray Transfer | 90% Ar / 10% CO2 | DC+ | 12-19 (1/2-3/4) | 12.3 (485) | 32 | 430 | 7.8 (17.1) |
| 1/16 in (1.6 mm) | Spray Transfer | 90% Ar / 10% CO2 | DC+ | 12-25 (1/2-1) | 5.3 (210) | 25 | 325 | 4.8 (10.7) |
| 1/16 in (1.6 mm) | Spray Transfer | 90% Ar / 10% CO2 | DC+ | 12-25 (1/2-1) | 6.0 (235) | 27 | 350 | 5.4 (12.0) |
| 1/16 in (1.6 mm) | Spray Transfer | 90% Ar / 10% CO2 | DC+ | 12-25 (1/2-1) | 7.4 (290) | 28 | 430 | 6.7 (14.8) |
NOTES
| Note |
|---|
| ⁽¹⁾ CTWD (Contact Tip to Work Distance). Subtract 1/4 in (6.4 mm) to calculate Electrical Stickout |
| ⁽²⁾ Procedures in these areas are procedures for short circuiting mode using 100% CO2. When using 75% Argon, 25% CO2 for short circuit transfer, reduce voltage by 1 to 2 volts. |