Diameters / Packaging
|
Diameters |
50 lb Master Carton |
|---|---|
| 1/8 in (3.2 mm) | TG4130125628 |
| 1/16 in (1.6 mm) | TG4130062628 |
| 3/32 in (2.4 mm) | TG4130093628 |
DETAILS
Techalloy® 4130 is a high strength, low alloy welding wire for joining steels of similar chemical composition, as well as for overlays where moderate hardness is required - Offered in TIG, MIG, and SAW welding products
Features
- High strength, low alloy
- Preheat and inter-pass temperature of 400°F (204.4°C) is required
- Overlays where moderate hardness is required
Disclaimers
Service Information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
MECHANICAL PROPERTIES
| Classification |
Elongation
% |
Tensile Strength
MPa (ksi) |
Yield Strength @ 0.2% Offset
MPa (ksi) |
|---|---|---|---|
| Typical Result | 11 | 1000 (145) | 900 (130) |
WIRE COMPOSITION
| Classification | %C | %Cr | %Fe | %Mn | %Mo | %Si |
|---|---|---|---|---|---|---|
| Typical Result | 0.31 | 0.93 | Balance | 0.52 | 0.20 | 0.28 |