DETAILS
High deposition stick electrode for large welds in flat or Slightly downhill (15° max) positions
Features
- High deposition rates
- Smooth bead appearance
- Minimal spatter
- Shallow penetration
Service Information
You May Also Need
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.1 | E7024-1 |
| ISO | ISO 2560-B | E4924-1 A |
| ABS | AWS A5.1 | E7024-1 |
| BV | BV - Chapter 5 | 1 |
| CWB | CSA W48 | E4924-1 |
| DNV-GL | DNV - 2.9 | 1 |
| LR | LR - Chapter 11 | 1M |
MECHANICAL PROPERTIES
| Classification |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Charpy V-Notch
J (ft-lbs) @ -20°C (0°F) |
Hardness Rockwell B |
|---|---|---|---|---|---|
| E7024-1 Requirement | 400 (58) min. | 480 (70) min. | 22 min. | 27 (20) min. | |
| Typical Result, As-welded | 450-530 (65-76) | 520-610 (76-88) | 22-30 | 27-80 (20-59) | 82-93 |
DEPOSIT COMPOSITION
| Classification | %C | %Cr | %Mn | %Mo | %Ni | %P | %S | %Si | %V | %Mn+Ni+Cr+Mo+V |
|---|---|---|---|---|---|---|---|---|---|---|
| E7024-1 Requirement | 0.15 max. | 0.20 max. | 1.25 max. | 0.30 max. | 0.30 max. | 0.035 max. | 0.035 max. | 0.90 max. | 0.08 max. | 1.50 max. |
| Typical Result | 0.05-0.11 | 0.03-0.06 | 0.67-1.13 | 0.02 max. | 0.01-0.05 | 0.012-0.022 | 0.004-0.011 | 0.25-0.54 | 0.02-0.03 | 0.79-1.25 |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity⁽¹⁾ |
Current
Amps |
|---|---|---|
| 1/8 in (3.2 mm) | AC | 115-175 |
| 1/8 in (3.2 mm) | DC± | 100-160 |
| 5/32 in (4.0 mm) | AC | 180-240 |
| 5/32 in (4.0 mm) | DC± | 160-215 |
| 3/16 in (4.8 mm) | AC | 240-300 |
| 3/16 in (4.8 mm) | DC± | 220-280 |
| 7/32 in (5.6 mm) | AC | 300-380 |
| 7/32 in (5.6 mm) | DC± | 270-340 |
| 1/4 in (6.4 mm) | AC | 340-440 |
| 1/4 in (6.4 mm) | DC± | 320-400 |
NOTES
| Note |
|---|
| ⁽¹⁾ Preferred polarity is listed first. |