Diameters / Packaging
|
Diameters |
6.4 KG COIL |
|---|---|
| 5/64 in (2.0 mm) | ED033827 |
DETAILS
A mild steel self-shielded flux-cored wire designed to provide low temperature impact toughness in a variety of offshore applications.
Features
- Premium Offshore Weldability – designed to provide optimal weldability in narrow TKY joints and poor fit up conditions
- Excellent Toe Wash-In – expect fast travel speeds and a flat bead face when using vertical-up or vertical-down welding techniques
- Low Temperature Impact Toughness – meets ABS 4YSA and AWS J classification
- Low Diffusible Hydrogen Levels – meets H8 diffusible hydrogen requirements over a range of humidity levels
- ProTech® Packaging – hermetically sealed packaging for moisture resistance
- Q2 Lot – certificate showing actual deposit chemistry and mechanical properties per lot available online
Service Information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.29 | E71T8-Ni2-JH8 |
| AWS | AWS A5.36 | E71T8-A4-Ni2-H8 |
| ABS | ABS - Part 2 | 4YSA H5 |
| DNV-GL | DNV - 2.9 | IV YMS H5 |
| LR | LR - Chapter 11 | 4YS H5 |
MECHANICAL PROPERTIES
| Classification | Polarity |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Charpy V-Notch
J (ft-lbs) @ -40°C (-40°F) |
|---|---|---|---|---|---|
| E71T8-Ni2-JH8 Requirement | DC- | 400 (58) min. | 480-620 (70-90) | 20 min. | 27 (20) min. |
| E71T8-A4-Ni2-H8 Requirement | DC- | 400 (58) min. | 480-660 (70-95) | 22 min. | 27 (20) min. |
| Typical Result, As-welded | DC- | 410 (60) | 500-570 (72-83) | 23 | 42-446 (31-329) |
DEPOSIT COMPOSITION
| Classification | Polarity | %Al | %C | %Mn | %Ni | %P | %S | %Si |
Diffusible Hydrogen
mL/100g Weld Metal |
|---|---|---|---|---|---|---|---|---|---|
| E71T8-Ni2-JH8 Requirement | DC- | 1.8 max. | 0.12 max. | 1.50 max. | 1.75 - 2.75 | 0.030 max. | 0.030 max. | 0.80 max. | 8.0 max. |
| E71T8-A4-Ni2-H8 Requirement | DC- | 1.8 max. | 0.12 max. | 1.50 max. | 1.75 - 2.75 | 0.030 max. | 0.030 max. | 0.80 max. | 8 max. |
| Typical Result | DC- | 0.8-1.1 | 0.01-0.03 | 0.70-1.13 | 1.78-2.11 | 0.016 | 0.004 | 0.13-0.18 | 1.6-6.9 |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity |
CTWD
mm (in.) |
Wire Feed Speed
m/min (in/min) |
Voltage
volts |
Approx. Current
amps |
Melt-off Rate
kg/hr (lb/hr) |
Deposition Rate
kg/hr (lb/hr) |
Efficiency
% |
|---|---|---|---|---|---|---|---|---|
| 1.6 mm (1/16 in) | DC- | 22 (7/8) | 2.3 (90) | 17-18 | 160 | 1.6 (3.6) | 1.1 (2.5) | 69 |
| 1.6 mm (1/16 in) | DC- | 22 (7/8) | 2.5 (100) | 18-19 | 170 | 1.6 (3.6) | 1.2 (2.8) | 72 |
| 1.6 mm (1/16 in) | DC- | 22 (7/8) | 2.8 (110) | 18-19 | 180 | 2.0 (4.4) | 1.4 (3.1) | 73 |
| 1.6 mm (1/16 in) | DC- | 22 (7/8) | 3.0 (120) | 19-20 | 195 | 2.2 (4.8) | 1.6 (3.5) | 73 |
| 1.6 mm (1/16 in) | DC- | 22 (7/8) | 3.3 (130) | 19-20 | 210 | 2.3 (5.1) | 1.7 (3.7) | 73 |
| 2.0 mm (5/64 in) | DC- | 25 (1) | 1.8 (70) | 16-17 | 205 | 1.9 (4.2) | 1.5 (3.2) | 76 |
| 2.0 mm (5/64 in) | DC- | 25 (1) | 2.0 (80) | 17-18 | 225 | 2.2 (4.7) | 1.6 (3.6) | 77 |
| 2.0 mm (5/64 in) | DC- | 25 (1) | 2.3 (90) | 18-19 | 240 | 2.4 (5.3) | 1.9 (4.2) | 78 |
| 2.0 mm (5/64 in) | DC- | 25 (1) | 2.5 (100) | 19-20 | 260 | 2.7 (5.9) | 2.1 (4.7) | 79 |
| 2.0 mm (5/64 in) | DC- | 25 (1) | 2.8 (110) | 20-21 | 260 | 3.0 (6.5) | 2.4 (5.2) | 80 |
| 2.0 mm (5/64 in) | DC- | 25 (1) | 3.0 (120) | 20-21 | 295 | 3.2 (7.1) | 2.5 (5.6) | 79 |