DETAILS
A low carbon, high manganese wire with nickel and molybdenum designed to weld high strength steels such as HY-80 and HSLA-80.
Features
- A low carbon, high manganese wire with nickel and molybdenum designed to weld high strength steels such as HY-80 and HSLA-80
- Delivers yield strength greater than 690 MPa (100 ksi)
- Capable of producing welds with 690 MPa (100 ksi) tensile strength
- Prior to using this material for ASME Boiler and Pressure Vessel Code Section III applications, please contact the Lincoln Electric Specials Department to receive a Certified Material Test Report (CMTR) which meets all requirements of NCA-3860
Service Information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.28 | ER100S-1 |
MECHANICAL PROPERTIES
| Classification | Shielding Gas | Polarity |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Charpy V-Notch
J (ft-lbs) @ -50°C (-60°F) |
Hardness Rockwell C |
|---|---|---|---|---|---|---|---|
| ER100S-1 Requirement | I1 | DC- | 610 (88) min. | 690 (100) min. | 16 min. | ||
| Typical Result, As-welded | 100% Ar | DC- | 790 (114) | 830 (120) | 26 | 202-355 (149-262) | 26 |
WIRE COMPOSITION
| Classification | %Al | %C | %Cr | %Mn | %Mo | %Ni | %P | %S | %Si | %Ti | %V | %Zr | %Total Cu |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ER100S-1 Requirement | 0.10 max. | 0.08 max. | 0.30 max. | 1.25 - 1.80 | 0.25 - 0.55 | 1.40 - 2.10 | 0.010 max. | 0.010 max. | 0.20 - 0.55 | 0.10 max. | 0.05 max. | 0.10 max. | 0.25 max. |
| Typical Result | 0.00 max. | 0.05 | 0.04 | 1.67 | 0.42-0.43 | 1.88-1.93 | 0.005 | 0.005 | 0.43-0.49 | 0.04 | 0.003 max. | 0.00 max. | 0.14 |