DETAILS
LINCORE® 50 Flux-Cored ideal for low carbon, medium carbon, low alloy, manganese and stainless steels delivers an abrasion resistant, even under conditions of moderate impact deposit with a Rockwell Hardness range of 34-56 (HRC) limited to deposit of four layers.
Features
- Delivers an abrasion resistant deposit, even under conditions of moderate impact
- Larger wire diameter sizes may be used for the submerged arc process
- Can be used on low carbon, medium carbon, low alloy, manganese and stainless steels
- Larger wire diameter sizes may be used for the submerged arc process
Service Information
You May Also Need
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
MECHANICAL PROPERTIES
| Classification | Base Metal | Number of layer | Hardness Rockwell C |
|---|---|---|---|
| Typical Result | Mild Steel | 1 Layer | 34-37 |
| Typical Result | Mild Steel | 2 Layers | 44-48 |
| Typical Result | Mild Steel | 3 Layers | 48-52 |
| Typical Result | 0.50% Carbon Steel | 1 Layer | 41-43 |
| Typical Result | 0.50% Carbon Steel | 2 Layers | 47-50 |
| Typical Result | 0.50% Carbon Steel | 3 Layers | 50-53 |
| Typical Result | Austenitic Mn Steel | 2 Layers | 43-45 |
| Typical Result | Austenitic Mn Steel | 3 Layers | 48-50 |
DEPOSIT COMPOSITION
| Classification | Product Size | %Al | %C | %Cr | %Mn | %Mo | %Si |
|---|---|---|---|---|---|---|---|
| Typical Result | .045" (1.1 mm) | 0.6 | 2.4 | 11.4 | 1.3 | 0.0 | 1.0 |
| Typical Result | 1/16" (1.6 mm) | 0.6 | 2.4 | 11.4 | 1.3 | 0.0 | 1.0 |
| Typical Result | 5/64" (2.0 mm) | 0.6 | 2.0 | 9.2 | 0.9 | 0.5 | 1.0 |
| Typical Result | 7/64" (2.8 mm) | 0.6 | 2.0 | 9.2 | 0.9 | 0.5 | 1.0 |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity |
ESO
mm (in.) |
Wire Feed Speed
m/min (in/min) |
Voltage
volts |
Approx. Current
amps |
Deposition Rate
kg/hr (lb/hr) |
|---|---|---|---|---|---|---|
| .045" (1.1 mm) | DC+ | 25 (1) | 5.1 (200) | 19-21 | 120 | 1.9 (4.2) |
| .045" (1.1 mm) | DC+ | 25 (1) | 10.2 (400) | 23-25 | 190 | 3.9 (8.5) |
| .045" (1.1 mm) | DC+ | 25 (1) | 15.2 (600) | 27-29 | 250 | 5.8 (12.8) |
| 1/16" (1.6 mm) | DC+ | 25 (1) | 3.8 (150) | 22-24 | 175 | 2.7 (5.9) |
| 1/16" (1.6 mm) | DC+ | 25 (1) | 8.9 (350) | 29-31 | 325 | 6.2 (13.6) |
| 1/16" (1.6 mm) | DC+ | 25 (1) | 11.4 (450) | 32-34 | 365 | 7.9 (17.5) |
| 5/64" (2.0 mm) | DC+ | 32 (1) | 3.2 (125) | 27 | 210 | 3.4 (7.4) |
| 5/64" (2.0 mm) | DC+ | 32 (1) | 5.1 (200) | 31 | 325 | 5.4 (11.9) |
| 5/64" (2.0 mm) | DC+ | 32 (1) | 6.4 (250) | 33 | 380 | 6.8 (14.9) |
| 7/64" (2.8 mm) | DC+ | 32 (1) | 2.0 (80) | 26 | 315 | 3.9 (8.6) |
| 7/64" (2.8 mm) | DC+ | 32 (1) | 2.5 (100) | 27 | 375 | 4.9 (10.7) |
| 7/64" (2.8 mm) | DC+ | 32 (1) | 3.3 (130) | 29 | 450 | 6.4 (14.0) |
| 7/64" (2.8 mm) | DC+ | 64 (2) | 2.5 (100) | 27 | 315 | 4.9 (10.7) |
| 7/64" (2.8 mm) | DC+ | 64 (2) | 3.3 (130) | 29 | 370 | 6.4 (14.0) |
| 7/64" (2.8 mm) | DC+ | 64 (2) | 4.4 (175) | 31 | 450 | 8.6 (19.0) |