DETAILS
Low Alloy Steel • AWS A5.28 ER80S-B2
Features
- B2 alloyed steel: 1.25% chromium, 0.5% molybdenum alloyed steel consumable designed for prolonged elevated temperature service up to 550°C (1022°F)
- Excellent corrosion resistance in refineries to sulfur bearing crude oil at 250°C-450°C (482°F-842°F)
- Capable of exceeding AWS minimum requirement of 550 MPa (80 ksi) tensile strength after 8 hours of stress relieving at 620°C (1150°F)
- Weld metal chemistry is low in impurity elements allowing it to respect the X Factor (<15ppm) and J-factor (<120ppm)
Service Information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.28 | ER80S-B2 |
MECHANICAL PROPERTIES
| Classification | Shielding Gas | Polarity |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
|---|---|---|---|---|---|
| ER80S-B2 Requirement | 100% Ar | DC- | 470 (68) min. | 550 (80) min. | 19 min. |
| Typical Result, 1 hour @ 620°C (1150°F) | 100% Ar | DC- | 580 (84) | 690-750 (100-108) | 26 |
WIRE COMPOSITION
| Classification | %C | %Cr | %Mn | %Mo | %Ni | %P | %S | %Si | %Total Cu |
|---|---|---|---|---|---|---|---|---|---|
| ER80S-B2 Requirement | 0.07 - 0.12 | 1.20 - 1.50 | 0.40 - 0.70 | 0.40 - 0.65 | 0.20 max. | 0.025 max. | 0.025 max. | 0.40 - 0.70 | 0.35 max. |
| Typical Result | 0.10-0.11 | 1.33-1.40 | 0.54-0.56 | 0.46-0.52 | 0.03-0.14 | 0.003-0.005 | 0.003-0.004 | 0.54-0.56 | 0.20-0.23 |