DETAILS
Excellent operator appeal and slag detachability.
Features
- High deposition in the flat and horizontal positions
- Excellent operator appeal and slag detachability
- Designed for welding with 100% CO2 shielding gas
- ProTech® foil bag packaging
Typical Applications
- Structural fabrication
- Heavy equipment
- Shipbuilding
Welding Positions
- Flat/Horizontal
Shielding Gas
- 100% CO2
Service Information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
MECHANICAL PROPERTIES
| Classification | Shielding Gas | Polarity |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Charpy V-Notch
J (ft-lbs) @ -40°C (-40°F) |
|---|---|---|---|---|---|---|
| E80T1-Ni1C-JH8 Requirement | 100% CO2 | DC+ | 470 (68) min. | 550-690 (80-100) | 19 min. | 27 (20) min. |
| E80T1-C1A4-Ni1-H8 Requirement | 100% CO2 | DC+ | 470 (68) min. | 550-690 (80-100) | 19 min. | 27 (20) min. |
| Typical Result, As-welded | 100% CO2 | DC+ | 540-600 (78-87) | 610-670 (88-96) | 24-28 | 28-84 (21-62) |
DEPOSIT COMPOSITION
| Classification | Shielding Gas | Polarity | %B | %C | %Cr | %Mn | %Mo | %Ni | %P | %S | %Si | %V |
Diffusible Hydrogen
mL/100g Weld Metal |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| E80T1-Ni1C-JH8 Requirement | 100% CO2 | DC+ | 0.12 max. | 0.15 max. | 1.50 max. | 0.35 max. | 0.80 - 1.10 | 0.030 max. | 0.030 max. | 0.80 max. | 0.05 max. | 8.0 max. | |
| E80T1-C1A4-Ni1-H8 Requirement | 100% CO2 | DC+ | 0.12 max. | 0.15 max. | 1.75 max. | 0.35 max. | 0.80 - 1.10 | 0.030 max. | 0.030 max. | 0.80 max. | 0.05 max. | 8 max. | |
| Typical Result | 100% CO2 | DC+ | 0.002-0.004 | 0.04-0.08 | 0.09 max. | 1.29-1.45 | 0.01 max. | 0.80-1.03 | 0.016 max. | 0.010 max. | 0.52-0.58 | 0.03 max. | 1-8 |
TYPICAL OPERATING PROCEDURES
| Diameter | Shielding Gas | Polarity |
CTWD
mm (in.)⁽¹⁾ |
Wire Feed Speed
m/min (in/min) |
Voltage
volts |
Approx. Current
amps |
Melt-off Rate
kg/hr (lb/hr) |
Deposition Rate
kg/hr (lb/hr) |
Efficiency
% |
|---|---|---|---|---|---|---|---|---|---|
| 1/16 in (1.6 mm) | 100% CO2 | DC+ | 25 (1) | 3.2 (125) | 23-27 | 155 | 2.2 (4.8) | 2.0 (4.4) | 84 - 89 |
| 1/16 in (1.6 mm) | 100% CO2 | DC+ | 25 (1) | 6.4 (250) | 25-29 | 250 | 4.5 (9.9) | 4.0 (8.8) | 84 - 89 |
| 1/16 in (1.6 mm) | 100% CO2 | DC+ | 25 (1) | 9.5 (375) | 28-32 | 325 | 6.8 (14.9) | 6.0 (13.2) | 84 - 89 |
| 5/64 in (2.0 mm) | 100% CO2 | DC+ | 25 (1) | 3.2 (125) | 23-27 | 240 | 3.5 (7.8) | 3.1 (6.8) | 84 - 88 |
| 5/64 in (2.0 mm) | 100% CO2 | DC+ | 25 (1) | 5.7 (225) | 25-29 | 350 | 6.4 (14.0) | 5.5 (12.2) | 84 - 88 |
| 5/64 in (2.0 mm) | 100% CO2 | DC+ | 31 (1 1/4) | 8.3 (325) | 27-32 | 395 | 8.5 (18.6) | 7.5 (16.4) | 84 - 88 |
| 3/32 in (2.4 mm) | 100% CO2 | DC+ | 25 (1) | 3.2 (125) | 27-32 | 320 | 5.4 (11.9) | 4.7 (10.3) | 87 - 89 |
| 3/32 in (2.4 mm) | 100% CO2 | DC+ | 31 (1 1/4) | 5.1 (200) | 28-33 | 450 | 8.6 (19.0) | 7.6 (16.7) | 87 - 89 |
| 3/32 in (2.4 mm) | 100% CO2 | DC+ | 31 (1 1/4) | 6.4 (250) | 31-37 | 580 | 13.1 (28.8) | 11.4 (25.1) | 87 - 89 |
NOTES
| Note |
|---|
| ⁽¹⁾ To estimate ESO, subtract 1/4 in. (6.0 mm) from CTWD. |