Menu Close
Ultracore stainless, flux-cored wire, plastic spool

Diameters / Packaging

Diameters
 33 lb Spool
0.045 in (1.1 mm) ED034855
0.052 in (1.3 mm) ED034856
1/16 in (1.6 mm) ED034857

UltraCore® 81Ni1M-H Plus Flux-cored (FCAW-G) Wire

Flux-Cored Gas-Shielded (FCAW-G) | ED034855

CLASSIFICATIONS:
E81T1-Ni1M-JH4
E81T1-M21A8-Ni1-H4

UltraCore® 81Ni1M-H Plus from Lincoln Electric is capable of superior toughness at-60°F

Diameter

Select Diameter

  • 0.045 in (1.1 mm)
  • 0.052 in (1.3 mm)
  • 1/16 in (1.6 mm)

Package

Select Package

  • 33 lb Spool

DETAILS

Innovative design capable of superior toughness at-60°F

Features

  • Innovative design capable of superior toughness at-60°F
  • Designed to meet AWS strength and toughness requirements in both as-welded and stress-relieved conditions
  • Designed for welding with 75-80% Argon/Balance CO 2 shielding gas
  • H4 diffusible hydrogen levels
  • ProTech® foil bag packaging
  • Designed to accomodate applications requiring Nickel content of 1% max

Service Information

Documentation

You May Also Need

Magnum 400 MIG Gun

Magnum® 400 Welding Guns

K471-21
Image not found

Magnum® Contact Tip - Standard, .045 in (1.2 mm) - 10/pack

KP14-45
Magnum Gun Liner

Cable Liner .035-.045 in (0.9-1.2 mm) 15 ft (4.6 m)

KP42-4045-15
Red Line Premium Leather MIG Stick Welding Gloves

Premium Leather MIG Stick Welding Gloves - Large

K2980-L
View All

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.29 E81T1-Ni1M-JH4
AWS AWS A5.36 E81T1-M21A8-Ni1-H4, E81T1-M21P4-Ni1-H4
ABS ABS - Part 2 4YQ460SA H5
CWB CSA W48 E551T1-M21A5-Ni1-H4 (E551T1-Ni1M-JH4)
DNV-GL DNV - 2.9 IV Y46MS H5
LR LR - Chapter 11 4Y46S H5

MECHANICAL PROPERTIES

Classification Shielding Gas Polarity Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -40°C (-40°F) 		Charpy V-Notch
J (ft-lbs) @ -50°C (-60°F) 		Charpy V-Notch
J (ft-lbs) @ -62°C (-80°F)
E81T1-Ni1M-JH4 Requirement 75-80% Ar, balance CO2 DC+ 470 (68) min. 550-690 (80-100) 19 min. 27 (20) min.
E81T1-M21A8-Ni1-H4 Requirement M21-ArC DC+ 470 (68) min. 550-690 (80-100) 19 min. 27 (20) min.
E81T1-M21P4-Ni1-H4 Requirement M21-ArC DC+ 470 (68) min. 550-690 (80-100) 19 min. 27 (20) min.
Typical Result, As-welded 75% Ar, 25% CO2 DC+ 480-610 (70-88) 560-670 (82-96) 20-29 92-123 (68-91) 32-170 (24-125) 37-41 (28-30)
Typical Result, 1 hour @ 620°C (1150°F) 75% Ar, 25% CO2 DC+ 470-510 (68-74) 570-610 (83-88) 26-29 56-148 (42-109)

DEPOSIT COMPOSITION

Classification Shielding Gas Polarity %B %C %Cr %Mn %Mo %Ni %P %S %Si %V Diffusible Hydrogen
mL/100g Weld Metal
E81T1-Ni1M-JH4 Requirement 75-80% Ar, balance CO2 DC+ 0.12 max. 0.15 max. 1.75 max. 0.35 max. 0.80 - 1.10 0.030 max. 0.030 max. 0.80 max. 0.05 max. 4 max.
E81T1-M21A8-Ni1-H4 Requirement M21-ArC DC+ 0.12 max. 0.15 max. 1.75 max. 0.35 max. 0.80 - 1.10 0.030 max. 0.030 max. 0.80 max. 0.05 max. 4 max.
E81T1-M21P4-Ni1-H4 Requirement M21-ArC DC+ 0.12 max. 0.15 max. 1.75 max. 0.35 max. 0.80 - 1.10 0.030 max. 0.030 max. 0.80 max. 0.05 max. 4 max.
Typical Result 75% Ar, 25% CO2 DC+ 0.004-0.007 0.05-0.07 0.06 max. 1.09-1.47 0.02 max. 0.80-0.99 0.020 max. 0.015 max. 0.33-0.50 0.01 max. 1.6-4

TYPICAL OPERATING PROCEDURES

Diameter Shielding Gas Polarity CTWD
mm (in.)⁽¹⁾ 		Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps 		Melt-off Rate
kg/hr (lb/hr) 		Deposition Rate
kg/hr (lb/hr) 		Efficiency
%
0.045 in (1.1 mm) 75% Ar, 25% CO2 DC+ 19 (3/4) 4.4 (175) 24 - 28 120 1.8 (3.9) 1.5 (3.4) 85-87
0.045 in (1.1 mm) 75% Ar, 25% CO2 DC+ 19 (3/4) 6.4 (250) 25 - 29 140 2.5 (5.6) 2.2 (4.8) 85-87
0.045 in (1.1 mm) 75% Ar, 25% CO2 DC+ 19 (3/4) 7.6 (300) 26 - 30 155 3.1 (6.8) 2.6 (5.8) 85-87
0.045 in (1.1 mm) 75% Ar, 25% CO2 DC+ 19 (3/4) 8.9 (350) 27 - 31 170 3.6 (7.9) 3.1 (6.8) 85-87
0.045 in (1.1 mm) 75% Ar, 25% CO2 DC+ 25 (1) 10.2 (400) 28 - 32 185 4.1 (9.0) 3.5 (7.8) 85-87
0.045 in (1.1 mm) 75% Ar, 25% CO2 DC+ 25 (1) 11.4 (450) 28 - 32 200 4.6 (10.1) 4.0 (8.8) 85-87
0.045 in (1.1 mm) 75% Ar, 25% CO2 DC+ 25 (1) 12.7 (500) 29 - 33 220 5.1 (11.3) 4.4 (9.8) 85-87
0.052 in (1.3 mm) 75% Ar, 25% CO2 DC+ 19 (3/4) 3.8 (150) 24 - 28 150 2.1 (4.7) 1.7 (3.8) 81-84
0.052 in (1.3 mm) 75% Ar, 25% CO2 DC+ 19 (3/4) 5.1 (200) 25 - 29 170 2.9 (6.3) 2.4 (5.2) 81-84
0.052 in (1.3 mm) 75% Ar, 25% CO2 DC+ 19 (3/4) 6.4 (250) 26 - 30 195 3.5 (7.8) 3.0 (6.5) 81-84
0.052 in (1.3 mm) 75% Ar, 25% CO2 DC+ 25 (1) 7.6 (300) 27 - 31 215 4.3 (9.4) 3.6 (7.9) 81-84
0.052 in (1.3 mm) 75% Ar, 25% CO2 DC+ 25 (1) 8.9 (350) 28 - 32 240 5.0 (11.0) 4.2 (9.2) 81-84
1/16 in (1.6 mm) 75% Ar, 25% CO2 DC+ 19 (3/4) 3.8 (150) 25 - 29 190 2.9 (6.4) 2.4 (5.3) 83-87
1/16 in (1.6 mm) 75% Ar, 25% CO2 DC+ 19 (3/4) 4.4 (175) 25 - 29 205 3.4 (7.5) 2.9 (6.3) 83-87
1/16 in (1.6 mm) 75% Ar, 25% CO2 DC+ 19 (3/4) 5.1 (200) 26 - 30 220 3.9 (8.5) 3.3 (7.2) 83-87
1/16 in (1.6 mm) 75% Ar, 25% CO2 DC+ 19 (3/4) 5.7 (225) 26 - 30 230 4.4 (9.6) 3.7 (8.1) 83-87
1/16 in (1.6 mm) 75% Ar, 25% CO2 DC+ 19 (3/4) 6.4 (250) 27 - 31 245 4.8 (10.6) 4.1 (9.1) 83-87
1/16 in (1.6 mm) 75% Ar, 25% CO2 DC+ 25 (1) 7.6 (300) 27 - 31 275 5.8 (12.7) 4.9 (10.9) 83-87
1/16 in (1.6 mm) 75% Ar, 25% CO2 DC+ 25 (1) 8.3 (325) 28 - 32 290 6.3 (13.8) 5.4 (11.9) 83-87
1/16 in (1.6 mm) 75% Ar, 25% CO2 DC+ 25 (1) 8.9 (350) 28 - 32 300 6.7 (14.8) 5.8 (12.8) 83-87

NOTES

Note
⁽¹⁾ To estimate ESO subtract 1/4 in. (6.0 mm) from CTWD