Diameters / Packaging
|
Diameters |
33 lb Spool |
|---|---|
| 0.045 in (1.1 mm) | MG418045667 |
DETAILS
Techalloy® offers a wide variety of nickel alloy grades of MIG, TIG, and SAW welding products lot tested with certificates of actual wire chemistry and typical mechanical results available online
Features
- Used for TIG, MIG and SAW welding of copper alloys
- Dissimilar welding applications include joining Nickel 200 to copper-nickel alloys
- Q2 Lot® - Certificate showing actual wire composition available online
Service Information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.14 | ERNiCu-7 |
| CWB | AWS A5.14 | ERNiCu-7 |
| MIL | MIL-E-21562E | EN60 |
WIRE COMPOSITION
| Classification | %Al | %C | %Cu | %Fe | %Mn | %P | %S | %Si | %Ti | %Ni+Co |
|---|---|---|---|---|---|---|---|---|---|---|
| ERNiCu-7 Requirement | 1.25 max. | 0.15 max. | Remainder | 2.5 max. | 4.0 max. | 0.02 max. | 0.015 max. | 1.25 max. | 1.5 - 3.0 | 62.0 - 69.0 |
| Typical Result | 0.18 | 0.05 | 27.9 | 0.1 | 3.5 | 0.003 max. | 0.003 max. | 0.32 | 2.3 | 65.8 |
TYPICAL OPERATING PROCEDURES
| Diameter | Shielding Gas | Polarity |
Voltage
volts |
Approx. Current
amps |
|---|---|---|---|---|
| .035" (0.9 mm) | 75% Ar, 25% He | DC+ | 25-28 | 160-200 |
| .045" (1.1 mm) | 75% Ar, 25% He | DC+ | 26-30 | 190-230 |
| 1/16" (1.6 mm) | 75% Ar, 25% He | DC+ | 29-33 | 200-250 |