Diameters / Packaging
|
Diameters |
33 lb Spool |
|---|---|
| 0.045 in (1.1 mm) | MG606045667 |
DETAILS
Techalloy® offers a wide variety of nickel alloy grades of MIG, TIG, and SAW welding products lot tested with certificates of actual wire chemistry and typical mechanical results available online
Features
- Used for TIG, MIG and SAW welding of base materials such as ASTM B163, B166, B167 and B168 - alloys which have UNS Number N06601
- Suitable for applications ranging from cryogenic to high temperatures making this alloy one of the most used in the nickel family
- Used for dissimilar welding applications between various nickel alloys and stainless or carbon steels, as well as for overlay
Typical Applications
- Maintenance and repair welding
- General Fabrication
- Process Industries
Welding Positions
- All
Shielding Gas
- 75% Ar/25% He
Service Information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.14 | ERNiCr-3 |
| CWB | AWS A5.14 | ERNiCr-3 |
| MIL | MIL-E-21562E | EN82 |
WIRE COMPOSITION
| Classification | %C | %Cr | %Cu | %Fe | %Mn | %P | %S | %Si | %Ti | %Nb+Ta | %Ni+Co |
|---|---|---|---|---|---|---|---|---|---|---|---|
| ERNiCr-3 Requirement | 0.10 max. | 18.0 - 22.0 | 0.50 max. | 3.0 max. | 2.5 - 3.5 | 0.03 max. | 0.015 max. | 0.50 max. | 0.75 max. | 2.0 - 3.0 | 67.0 min. |
| Typical Result | 0.04 | 19.9 | 0.02 | 1.2 | 2.9 | 0.003 max. | 0.003 max. | 0.10 | 0.35 | 2.4 | 73.2 |
TYPICAL OPERATING PROCEDURES
| Diameter | Shielding Gas | Polarity |
Voltage
volts |
Approx. Current
amps |
|---|---|---|---|---|
| .035" (0.9 mm) | 75% Ar, 25% He | DC+ | 26-29 | 150-190 |
| .045" (1.1 mm) | 75% Ar, 25% He | DC+ | 28-32 | 180-220 |
| 1/16" (1.6 mm) | 75% Ar, 25% He | DC+ | 29-33 | 200-250 |