Diameters / Packaging
|
Diameters |
33 lb Spool |
|---|---|
| 0.045 in (1.1 mm) | MG606045667 |
DETAILS
Techalloy® offers a wide variety of nickel alloy grades of MIG, TIG, and SAW welding products lot tested with certificates of actual wire chemistry and typical mechanical results available online
Features
- Used for TIG, MIG and SAW welding of base materials such as ASTM B163, B166, B167 and B168 - alloys which have UNS Number N06605
- Suitable for applications ranging from cryogenic to high temperatures making this alloy one of the most used in the nickel family
- Used for dissimilar welding applications between various nickel alloys and stainless or carbon steels, as well as for overlay
Service Information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.14 | ERNiCr-3 |
| CWB | AWS A5.14 | ERNiCr-3 |
| MIL | MIL-E-21562E | EN82 |
WIRE COMPOSITION
| Classification | %C | %Cr | %Cu | %Fe | %Mn | %P | %S | %Si | %Ti | %Nb+Ta | %Ni+Co |
|---|---|---|---|---|---|---|---|---|---|---|---|
| ERNiCr-3 Requirement | 0.10 max. | 18.0 - 22.0 | 0.50 max. | 3.0 max. | 2.5 - 3.5 | 0.03 max. | 0.015 max. | 0.50 max. | 0.75 max. | 2.0 - 3.0 | 67.0 min. |
| Typical Result | 0.04 | 19.9 | 0.02 | 1.2 | 2.9 | 0.003 max. | 0.003 max. | 0.10 | 0.35 | 2.4 | 73.2 |
TYPICAL OPERATING PROCEDURES
| Diameter | Shielding Gas | Polarity |
Voltage
volts |
Approx. Current
amps |
|---|---|---|---|---|
| .035" (0.9 mm) | 75% Ar, 25% He | DC+ | 26-29 | 150-190 |
| .045" (1.1 mm) | 75% Ar, 25% He | DC+ | 28-32 | 180-220 |
| 1/16" (1.6 mm) | 75% Ar, 25% He | DC+ | 29-33 | 200-250 |