Diameters / Packaging
|
Diameters |
10 lb (4.5 kg) Plastic Tube |
|---|---|
| 3/32 in (2.4 mm) | TG825093638 |
DETAILS
TECHALLOY® 825 is ideal for welding the nickel-chromium-molybdenum-copper alloys. This alloy can be used for overlay cladding where similar chemical composition is required.
Features
- Used for MIG and TIG welding of nickel-chromium-molybdenum-copper alloys
- Can be used to overlay cladding where similar chemical composition is required
- Q2 Lot® - Certificate showing actual wire composition available online
Typical Applications
- Used for welding the nickel-iron-chromium-molybdenum-copper alloy (ASTM B 423 having UNS number N08825) to itself
- General Fabrication
- Maintenance and Repair
Welding Positions
- All
Shielding Gas
- TIG 100% Argon
Service Information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.14 | ERNiFeCr-1 |
| ABS | AWS A5.14 | ERNiFeCr-1 |
| CWB | AWS A5.14 | ERNiFeCr-1 |
WIRE COMPOSITION
| Classification | %Al | %C | %Cr | %Cu | %Fe | %Mn | %Mo | %P | %S | %Si | %Ti | %Ni+Co |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ERNiFeCr-1 Requirement | 0.20 max. | 0.05 max. | 19.5 - 23.5 | 1.5 - 3.0 | 22.0 min. | 1.0 max. | 2.5 - 3.5 | 0.03 max. | 0.03 max. | 0.50 max. | 0.6 - 1.2 | 38.0 - 46.0 |
| Typical Result | 0.05-0.08 | 0.01 | 22.9-23.0 | 1.5-2.5 | 25.2-26.4 | 0.4-0.6 | 3.0-3.1 | 0.01-0.02 | 0.003 max. | 0.15-0.17 | 0.8-1.1 | 44.3 |