Diameters / Packaging
|
Diameters |
10 lb (4.5 kg) Plastic Tube |
|---|---|
| 3/32 in (2.4 mm) | TG825093638 |
DETAILS
TECHALLOY® 825 is ideal for welding the nickel-chromium-molybdenum-copper alloys. This alloy can be used for overlay cladding where similar chemical composition is required.
Features
- Used for MIG and TIG welding of nickel-chromium-molybdenum-copper alloys
- Can be used to overlay cladding where similar chemical composition is required
- Q2 Lot® - Certificate showing actual wire composition available online
Service Information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.14 | ERNiFeCr-1 |
| ABS | AWS A5.14 | ERNiFeCr-1 |
| CWB | AWS A5.14 | ERNiFeCr-1 |
WIRE COMPOSITION
| Classification | %Al | %C | %Cr | %Cu | %Fe | %Mn | %Mo | %P | %S | %Si | %Ti | %Ni+Co |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ERNiFeCr-1 Requirement | 0.20 max. | 0.05 max. | 19.5 - 23.5 | 1.5 - 3.0 | 22.0 min. | 1.0 max. | 2.5 - 3.5 | 0.03 max. | 0.03 max. | 0.50 max. | 0.6 - 1.2 | 38.0 - 46.0 |
| Typical Result | 0.05-0.08 | 0.01 | 22.9-23.0 | 1.5-2.5 | 25.2-26.4 | 0.4-0.6 | 3.0-3.1 | 0.01-0.02 | 0.003 max. | 0.15-0.17 | 0.8-1.1 | 44.3 |