DETAILS
BLUE MAX® MIG 309LMo_MOD is ideal for buffer layer for overlays used to achieve a single-layer overlay with a chemical composition similar to that of a 316L stainless steel
Features
- Q2 Lot® - Certified Material Test Report showing actual wire composition, Country of Origin and calculated ferrite number (FN) of each lot is available online in the Certificate Center
- Proprietary surface lubricant for steady feeding and arc stability leading to exceptional performance at high wire feed speeds
- Similar to 309L with the exception for the addition of 2.0 - 3.0% molybdenum to increase its pitting corrosion resistance in halide-containing environments
- Surfacing (buffer layer) of base metals to improve their resistance to corrosion
- Used to achieve a single-layer overlay with a chemical composition similar to that of a 316L stainless steel
Disclaimers
Service Information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| ISO | ISO 14343-A | G 23 12 2 L |
WIRE COMPOSITION
| Classification | %C | %Cr | %Cu | %Mn | %Mo | %N | %Ni | %P | %S | %Si | Ferrite Number (Delong ©) | Ferrite Number (WRC-1992 ©) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| G 23 12 2 L Requirement | 0.03 max. | 21.0 - 25.0 | 0.5 max. | 1.0 - 2.5 | 2.0 - 3.5 | 11.0 - 15.5 | 0.03 max. | 0.02 max. | 1.0 max. | |||
| Typical Result | 0.01 | 21.5 | 0.1 | 1.4 | 2.5 | 0.06 | 14.9 | 0.02 | 0.003 max. | 0.3 | 11.5 | 9.1 |
TYPICAL OPERATING PROCEDURES
| Diameter | Shielding Gas |
Voltage
volts |
Approx. Current
amps |
|---|---|---|---|
| 0.035 in (0.9 mm) | 98% Ar / 2% O2 | 26-29 | 160-210 |
| 0.045 in (1.1 mm) | 98% Ar / 2% O2 | 28-32 | 180-250 |
| 0.062 in (1.6 mm) | 98% Ar / 2% O2 | 29-33 | 200-280 |